8800gtx 3-way sli

[tfs]

Hi, i have 3 8800gtx in 3-way sli. They are really hot so i've put my eyes over the setsugen, but i have some doubts about the this new vga cooler.

First, in the compatibility list appears to be compatible with the 8800 g80, does this includes the 8800gtx?

Second, the graphic cards are very close, i can use just 2 pci holes, 2 for each card. Is there enough space to be mounted in 3-way sli using this cooler?

Thanks.

[Okiwana Okimoto]

Hello tfs,

Setsugen should be mountable on a 8800 GTX. The Musashi was also previously. Normally not more than 2 PCI slots are required. But that does not mean that it is so with each card.

Best Regards,
OKi

[tfs]

Thanks for the answer.

I have another doubt. In this cooler the heat sink remains over the top of the vga, so now i'm asking if the heat sink could cover the conectors for the sli bridge, the 3-way sli bridge is larger than the normal sli bridge.

Thanks again.

[K_K3N]

I have 3 EVGA GTX 465's , I want to 3-way SLi them , but I think the heat pipes on the Setsugen 2 may block the extra SLI bridge port ?
Really need a thin cooler and one that leaves plenty of room for the 3-way SLI bridge . I am on a budget .. and water cooling is way out of my budget.

Thank you for any help ,
Regards ,
K_K3N