Musashi on Antec Fusion Remote case

[beppeoioi]

Hello everyone,
I Have installed your Ninja Mini in my Antec Fusion Remote case very well.
I would like to buy your VGA heatsink Musashi to be installed on a sapphire ati hd 4850 inside a antec case
I can install the Musashi in the antec fusion remote case?

Second question:
I can install the musashi on video card Sapphire HD4850 with Sapphire design?

Thank for all,
regards.

Beppe

[sumo]

Hello beppeoioi,

welcom to Scythe Forum.

Yes, the Musashi VGA Cooler fits on you 4580 and this package also should fit in your Antec case - but its tight.

Kind Regards
Chris - Scythe EU GmbH

[beppeoioi]

Originally Posted by sumo

Yes, the Musashi VGA Cooler fits on you 4580 and this package also should fit in your Antec case - but its tight.

Ok, I will try.
Thank you.

[Killerq]

Hi,

i just read this post and i'm very interested to know if the Mushashi will fit in an Antec NSK2480. If i'm not wrong is the same structure as the Fusion, so
beppeoioi, finally you get the Mushasin inside the case??

Regards,

Killerq

[hiroshige]

Hello Killerq,

all dimensions of Musashi can be found here: Exact Dimensions

Cheers,
Stefan - Scythe EU Hamburg

[Killerq]

Hi all,

finally I purchase a Mucshashi cooler and it was a nightmare put it inside Antec NSK2480. Swap the cooler was very easy. The problem is that it doesn't fit. I have to bend the case and the cooler and finally fits very tight inside. Also, the fan controller doesnt fit throw the PCI hole.

Howhever my temps and my noise go down from stock cooler:

Before
Idle: 60 - 62º fan at 40% silent
load: 80 - 85º fan at 80 - 85% very noisy

After
Idle: 38 - 40º fan at low very silent
load: 50- 57º fan at low very silent

Cheers

[jurian89]

Originally Posted by Killerq

Hi all,

finally I purchase a Mucshashi cooler and it was a nightmare put it inside Antec NSK2480. Swap the cooler was very easy. The problem is that it doesn't fit. I have to bend the case and the cooler and finally fits very tight inside. Also, the fan controller doesnt fit throw the PCI hole
Cheers

I was wondering, could you post some pictures of this mod ?

I would like to install musashi in my nsk2480 but i would not like it if i had to mod the top of the case.

Thanks in advance.

[Floh]

Originally Posted by Killerq

Also, the fan controller doesnt fit throw the PCI hole.

uhm, just pull off the knobs.

[sumo]

Hi Killerq,

Can you send us some pictures what you had to do to install the Musashi in your case?

To install the PCI bracket you have to remove the knobs, than you can fix the bracket and reinstall the knobs.

Cheers,
Chris