Mugen Compatibility List - Page 11

Vato · #**101** (**permalink**) 06-12-2008, 08:25 PM

I just installed it, and it fits!

Pictures are comming soon. Only thing that sucks is... my case will not be closed from now on! :P

Vato · #**102** (**permalink**) 06-12-2008, 08:58 PM

Pics!

http://img48.imageshack.us/img48/9110/p6120437wf9.jpg
http://img48.imageshack.us/img48/6533/p6120442pt6.jpg
http://img65.imageshack.us/img65/1245/p6120443tf0.jpg
http://img381.imageshack.us/img381/5390/p6120444wi5.jpg
http://img253.imageshack.us/img253/4633/p6120445eo8.jpg
http://img377.imageshack.us/img377/9826/p6120446mj2.jpg
http://img519.imageshack.us/img519/8649/p6120447uv9.jpg

Much of em are not that clear. But it is something, as you can see my case won't close anymore!

hiroshige · #**103** (**permalink**) 06-13-2008, 12:07 PM

Great that it fits, too bad that Mugen is too large for your case...

jurian89 · #**104** (**permalink**) 06-26-2008, 12:42 AM

mugen fits on MSI p45 platinum without any problems

foxbat · #**105** (**permalink**) 06-28-2008, 01:50 PM

The mugen fits OK on the Asus P5Q Pro and it's not too hard to reach in to the push-pin connectors when the board is in the case. Picture below. Clearance over the northbridge is about 10mm, same for the heatsink at the back as it is at the same height as the NB (35mm height off the board).

A fan attached in the standard way to blow through to the rear case extractor hangs over the first bank of RAM so you would have to detach the fan to change RAM. Those with an upper extractor (like me) may be better served by installing the mugen the other way around and have the fan blow up and out the top.

4ndr3w · #**106** (**permalink**) 07-02-2008, 11:21 AM

Hi,
is Mugen cooler compatible with ASUS M3A32-MVP DELUXE motherboard??? If I place Mugen with fan above RAM memory with passive coolers, will it go together??

Oli · #**107** (**permalink**) 07-02-2008, 11:55 AM

Somebody already asked for compatibility - seems to fit:
Mugen Compatibility List

As for the RAM the passive coolers shouldn't be too high. Heatpipes won't work and I'd also be concered about quite high passive elements like on the Dominator RAM modules. Very low stock coolers like these ( Crucial Ballistix DIMM 1GB PC2-5300U CL3-3-3-10 (DDR2-667) (BL12864AA663) Preisvergleich bei Geizhals.at Deutschland ) will surely work.

Bye Oli

4ndr3w · #**108** (**permalink**) 07-02-2008, 02:14 PM

Quote:

Originally Posted by Oli

Somebody already asked for compatibility - seems to fit:
Mugen Compatibility List

Thanks for answer, but there�s not ASUS M3A32. If Mugen fit to this motherboard, do I need retention kit for better grip because of bigger weight?

And I use this RAM by GEIL: PC2-6400 DDR2-800 Dual Channel Kit - Products - GeIL Memory . So as you speak with this passive coolers isn�t going to be problems?

Oli · #**109** (**permalink**) 07-02-2008, 02:36 PM

These are the posts I linked to (you have to click the link although it is called "comp list" it points to single posts not the list itself):

Quote:

M3A32 MVP Deluxe Hello everyone,

I wanted to know if a Mugen is compatible to a M3a32 MVP deluxe?
Does anyone have a Mugen + M3A32 MVP Deluxe, or is it possible to use the Mugen on that motherboard anyways? I hope you can help me...

thx
Monkey

Answer:

Quote:

Monkey king: The ASUS M3A32 MVP Deluxe is like "semi-compatible". If you have RAM like Corsair Dominator or those with heatpipes on them, then you will not be able to use the first RAM-Slot. If you have "normal" ram, it should be "OK".

The GEIL memory is safe concerning height and collision with fan.

4ndr3w · #**110** (**permalink**) 07-02-2008, 08:36 PM

uhh...sorry for that, I don�t see it. Anyway thanks for answers.

I have still one small question: is this retention kit usable (compatible) with socket AM2? => Scythe EU GmbH : Universal Retention Kit

#107 (permalink) 07-02-2008, 11:55 AM
Oli Senior Member Join Date: Aug 2007 Location: Germany, in the middle of Europe Posts: 375	Somebody already asked for compatibility - seems to fit: Mugen Compatibility List As for the RAM the passive coolers shouldn't be too high. Heatpipes won't work and I'd also be concered about quite high passive elements like on the Dominator RAM modules. Very low stock coolers like these ( Crucial Ballistix DIMM 1GB PC2-5300U CL3-3-3-10 (DDR2-667) (BL12864AA663) Preisvergleich bei Geizhals.at Deutschland ) will surely work. Bye Oli __________________ C2D E6700@3Ghz@1,152V / Mugen, Ret Kit & Slip Stream @ 650rpm / summer: idle 37 - load 65 / winter: idle 30 - load 58
	Last edited by Oli; 07-02-2008 at 12:13 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#101 (permalink) 06-12-2008, 08:25 PM
Vato Junior Member Join Date: Jun 2008 Posts: 6	I just installed it, and it fits! Pictures are comming soon. Only thing that sucks is... my case will not be closed from now on! :P

#102 (permalink) 06-12-2008, 08:58 PM
Vato Junior Member Join Date: Jun 2008 Posts: 6	Pics! http://img48.imageshack.us/img48/9110/p6120437wf9.jpg http://img48.imageshack.us/img48/6533/p6120442pt6.jpg http://img65.imageshack.us/img65/1245/p6120443tf0.jpg http://img381.imageshack.us/img381/5390/p6120444wi5.jpg http://img253.imageshack.us/img253/4633/p6120445eo8.jpg http://img377.imageshack.us/img377/9826/p6120446mj2.jpg http://img519.imageshack.us/img519/8649/p6120447uv9.jpg Much of em are not that clear. But it is something, as you can see my case won't close anymore!

#103 (permalink) 06-13-2008, 12:07 PM
hiroshige Marketing & Support Join Date: May 2008 Location: Hamburg Posts: 396	Great that it fits, too bad that Mugen is too large for your case... __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#104 (permalink) 06-26-2008, 12:42 AM
jurian89 Junior Member Join Date: Jun 2008 Posts: 6	mugen fits on MSI p45 platinum without any problems

#105 (permalink) 06-28-2008, 01:50 PM
foxbat Junior Member Join Date: Jun 2008 Posts: 1	The mugen fits OK on the Asus P5Q Pro and it's not too hard to reach in to the push-pin connectors when the board is in the case. Picture below. Clearance over the northbridge is about 10mm, same for the heatsink at the back as it is at the same height as the NB (35mm height off the board). A fan attached in the standard way to blow through to the rear case extractor hangs over the first bank of RAM so you would have to detach the fan to change RAM. Those with an upper extractor (like me) may be better served by installing the mugen the other way around and have the fan blow up and out the top.

#106 (permalink) 07-02-2008, 11:21 AM
4ndr3w Junior Member Join Date: Jul 2008 Posts: 3	Hi, is Mugen cooler compatible with ASUS M3A32-MVP DELUXE motherboard??? If I place Mugen with fan above RAM memory with passive coolers, will it go together??
	Last edited by 4ndr3w; 07-02-2008 at 11:29 AM.

#110 (permalink) 07-02-2008, 08:36 PM
4ndr3w Junior Member Join Date: Jul 2008 Posts: 3	uhh...sorry for that, I don�t see it. Anyway thanks for answers. I have still one small question: is this retention kit usable (compatible) with socket AM2? => Scythe EU GmbH : Universal Retention Kit