Kama Meter - SCKM-1000 - box door

crazy_rocker78 · #1 (**permalink**) 02-13-2008, 09:12 AM

Hello !

What's the size of the butons ?

Because I have a box with a door, and I would like to know if it can enter in

Thanks !

Surikan · #2 (**permalink**) 02-13-2008, 02:05 PM

Hello!

crazy_rocker78 · #3 (**permalink**) 02-13-2008, 04:51 PM

Thanks a lot !
(and sorry for my english !)

Surikan · #4 (**permalink**) 02-13-2008, 07:14 PM

You're welcome!

foufou55 · #5 (**permalink**) 04-07-2008, 02:12 PM

kaze master 5"25 have got the same size for buttons ?
thanks

Shinigami · #6 (**permalink**) 04-15-2008, 05:11 PM

The buttons are sticking out 11,5mm.

foufou55 · #7 (**permalink**) 04-16-2008, 05:31 PM

hello
12v to 4v ? 5v ?
thnaks

Oli · #8 (**permalink**) 04-16-2008, 06:00 PM

Correction:

I found only webpages with this info:
6,5 - 12 Volt

Shinigami needs to confirm this.

Bye Oli

Shinigami · #9 (**permalink**) 04-18-2008, 12:24 PM

Hi,

Kama Meter:
7-12V should be the spec, plus minus Tolerances should be what Oli said.

Kaze Master:
3,7V (�10%) ～ 12V (�10%)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#1 (permalink) 02-13-2008, 09:12 AM
crazy_rocker78 Junior Member Join Date: Feb 2008 Posts: 2	Kama Meter - SCKM-1000 - box door Hello ! What's the size of the butons ? Because I have a box with a door, and I would like to know if it can enter in Thanks !

#2 (permalink) 02-13-2008, 02:05 PM
Surikan Junior Member Join Date: Aug 2007 Posts: 27	Hello!

#3 (permalink) 02-13-2008, 04:51 PM
crazy_rocker78 Junior Member Join Date: Feb 2008 Posts: 2	Thanks a lot ! (and sorry for my english !)

#4 (permalink) 02-13-2008, 07:14 PM
Surikan Junior Member Join Date: Aug 2007 Posts: 27	You're welcome!

#5 (permalink) 04-07-2008, 02:12 PM
foufou55 Junior Member Join Date: Mar 2008 Posts: 7	kaze master 5"25 have got the same size for buttons ? thanks

#6 (permalink) 04-15-2008, 05:11 PM
Shinigami Marketing Join Date: Apr 2007 Location: Hamburg Posts: 855	The buttons are sticking out 11,5mm. __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#7 (permalink) 04-16-2008, 05:31 PM
foufou55 Junior Member Join Date: Mar 2008 Posts: 7	hello 12v to 4v ? 5v ? thnaks

#8 (permalink) 04-16-2008, 06:00 PM
Oli Senior Member Join Date: Aug 2007 Location: Germany, in the middle of Europe Posts: 419	Correction: I found only webpages with this info: 6,5 - 12 Volt Shinigami needs to confirm this. Bye Oli __________________ C2D E6700@3.33Ghz@1,28V / Mugen, Ret Kit & 2x Slip Stream @ 550rpm / summer: idle 37 - load 70 / winter: idle 33 - load 64

#9 (permalink) 04-18-2008, 12:24 PM
Shinigami Marketing Join Date: Apr 2007 Location: Hamburg Posts: 855	Hi, Kama Meter: 7-12V should be the spec, plus minus Tolerances should be what Oli said. Kaze Master: 3,7V (�10%) ～ 12V (�10%) __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers