Andy Samurai Master Dimensions & Compatibility

Shinigami · #1 (**permalink**) 07-16-2007, 02:52 PM

Link to the Compatibility List

Please find the attached image with the most important dimensions.

Best regards,
Scythe Support

nonsens112 · #2 (**permalink**) 07-18-2007, 05:30 PM

thx a lot.

but I think it's worth adding precise info about pipes' outstanding part - dimensions, slope...
many users (if not almost all) report a problem with installing this cooler in a "recommended" position because of NB heatsink being too high and too close to socket.

best regards, happy owner of this nice cooler

Shinigami · #3 (**permalink**) 07-18-2007, 05:45 PM

Hi nonsens112,

Welcome to our forum.
The pipes are not straight as you know, therefor it is a bit difficult to describe or supply the dimensions of these, even we would do it, most peaple could not use these to check on their system. I could add a couple more dimensions if there ary any specific you would recommend or need.

Greetings,
Scythe Support

Peter-Sh · #4 (**permalink**) 01-05-2008, 10:06 PM

Help me pls!!! What cooler from Scythe CPU Coolers is compatible with my ASUS P5E (X38)? It's not in your Compatibility List

I very want to buy Andy Samurai Master, but some mm's near RAM...

Peter-Sh@mail.ru

Shinigami · #5 (**permalink**) 01-11-2008, 08:46 PM

Hi Peter-Sh! Welcome to our forum.

Well, we do not have this motherboard around but user reported that Ninja PLUS and Mugen fits it. Based on that informations, I can say that Andy Samurai Master would fit but most safe would be with the heatpipes showing to the RAM.

#1 (permalink) 07-16-2007, 02:52 PM
Shinigami Marketing Join Date: Apr 2007 Location: Hamburg Posts: 851	Andy Samurai Master Dimensions & Compatibility Link to the Compatibility List Please find the attached image with the most important dimensions. Best regards, Scythe Support __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers
	Last edited by hiroshige; 05-16-2008 at 11:59 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#2 (permalink) 07-18-2007, 05:30 PM
nonsens112 Junior Member Join Date: Jul 2007 Location: msk.ru Posts: 1	thx a lot. but I think it's worth adding precise info about pipes' outstanding part - dimensions, slope... many users (if not almost all) report a problem with installing this cooler in a "recommended" position because of NB heatsink being too high and too close to socket. best regards, happy owner of this nice cooler

#3 (permalink) 07-18-2007, 05:45 PM
Shinigami Marketing Join Date: Apr 2007 Location: Hamburg Posts: 851	Hi nonsens112, Welcome to our forum. The pipes are not straight as you know, therefor it is a bit difficult to describe or supply the dimensions of these, even we would do it, most peaple could not use these to check on their system. I could add a couple more dimensions if there ary any specific you would recommend or need. Greetings, Scythe Support __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#4 (permalink) 01-05-2008, 10:06 PM
Peter-Sh Junior Member Join Date: Jan 2008 Posts: 2	Help me pls!!! What cooler from Scythe CPU Coolers is compatible with my ASUS P5E (X38)? It's not in your Compatibility List I very want to buy Andy Samurai Master, but some mm's near RAM... Peter-Sh@mail.ru
	Last edited by Peter-Sh; 01-07-2008 at 12:27 PM.

#5 (permalink) 01-11-2008, 08:46 PM
Shinigami Marketing Join Date: Apr 2007 Location: Hamburg Posts: 851	Hi Peter-Sh! Welcome to our forum. Well, we do not have this motherboard around but user reported that Ninja PLUS and Mugen fits it. Based on that informations, I can say that Andy Samurai Master would fit but most safe would be with the heatpipes showing to the RAM. __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers