View Single Post
  #1 (permalink)  
Old 01-04-2009, 10:16 AM
Mech0z Mech0z is offline
Junior Member
 
Join Date: Jan 2009
Posts: 3
Default Cant get screws in my SQD2.5" (to mount in case)

This sounds like the same problem, but my german is very bad Link

But I can not get SCQ installed in my Lian Li V2110b using the normal screws I use for all my other drives. The screwholes are too small, I have tried with all kinds of screws and no one fits.
Are you using a none standard form? Because the mounting mechanism of my case makes me incapeable of using any other screws than those coming with my case (Which have standard size as they fit in all my other 3 drives)

A picture of mine though without screws in the red holes at that moment, they are not the problem though, only the blue marked ones.


Is there anything I can do?

Ps serial number: SQD2.5-000000069F
Reply With Quote
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58