Kodati Rev.B

The development of Kodati Rev. B builds on the regarded benefits of the original Kodati. With only 34-mm height an extremely flat and compact cooler for use in HTPC&'s or NAS systems .This was made possible due to the placement of the fan under the heat sink.

The Kodati guarantees safe and reliable cooling of systems up to 65 watts TDP. Installation with screws is easy as pie. A backplate is not required, in this way problems with electronic components on the back of the motherboard will be avoided and the compatibility to a huge variety of mainboards is increased. In particular, the Kodati Rev. B, one of the first cooler on the retail market, suites well for mounting on socket AM1 systems.



Kodati Rev. B KühlerKodati Rev. B KühlerKodati Rev. B KühlerKodati Rev. B KühlerKodati Rev. B KühlerKodati Rev. B KühlerKodati Rev. B KühlerKodati Rev. B KühlerKodati Rev. B KühlerKodati Rev. B KühlerKodati Rev. B KühlerKodati Rev. B Kühler


Model Name:
Kodati Rev. B CPU Cooler


Scythe Co., Ltd. Japan

Socket LGA775
Socket LGA1150

Sockel LGA1151
Socket LGA1155
Socket LGA1156

Socket AM1
Socket AM2
Socket AM2+
Socket AM3
Socket AM3+
Socket FM1
Socket FM2
Socket FM2+

82,5 x 95 x 34 mm / 3.25 x 3.74 x 1.34 inch (more dimensions)

180 g / 6.35 oz

Manual, thermal compound, installation material

Base Plate Material:
Nickel plated copper 38 x 50 mm (more Info)

Fan Specifications

Model Name:
Slip Stream Slim 80 PWM


Fan Size:
80 x 80 x 10 mm

Fan Speed:
800 (±30%) - 3300upm (±10%) (PWM controled)

Air Flow:
10,2 ~ 42,2 m³/h / 6,0 ~ 24,82 CFM

Noise Level:
8,2 ~ 32,5 dBA

Static Pressure:
5,30 ~ 19,52 Pa / 0,54 ~ 1,99 mm H²O

Voltage / Current:
12V / 0,20 A

Power Requirements:
2,4 Watt

Bearing Type:
Sleeve Bearing

Please note that the Scythe Kodati when using the PWM control is approved till 65W TDP. If the fan is used unregulated (at maximum speed), processors can be cooled up to 88W TDP.


12-12-2015 i3-Test (German)
11-05-2015 AM1-Test (German)


AM1 compatibility
The new revision of the Scythe Kodati, as one of the first cooler on the retail market, offers the possibility of mounting on base AM1 (FS1b) motherboards. Therefore, it is now possible to replace the stock cooler (the AM1 APU) against a much more powerful and silent model.


Extremely Flat Design
With just 34 mm in height, the Kodati is ideal for doing its' job in cases with very limited space, frequently encountered in Mini-ITX cases. Where other models would be hopelessly stranded, the Kodati fits in just nicely.


Compact Dimensions
Thanks to the Kodati's reserved dimensions, exisiting PCI-e slots will not be blocked, hence allowing the use of separate graphic as well as other add-on cards. Possible collisions with mainboard components or heatsinks are kept to a minimum.


E.I.S. (Easy Installation with Screw)
As the Kodati is screwed on directly without a back plate, possible incompatibilites when installing can be ruled out as a back plate / components collision is out of the question - a scenario often encountered with Mini-ITX mainboards where for reasons of limited space the backside is often used to house various components.



Kodati Rev. B Presentation