SimplyCool

 

Mugen 5 Rev.B

Outstanding performance with overclocking potential, high efficiency and a sophisticated heatsink design are just three of the many benefits of the Scythe Mugen series. The Mugen 5 TUF Gaming Alliance offers all these benefits, combining them with the familiar design of the TUF Gaming Alliance and exclusive RGB lighting. The eye-catching top cover, adorned with the unique pattern and logo of the TUF Gaming Alliance series from ASUS™, and a translucent surface with adjustable RGB LEDs make a clear, visual statement. A 120 mm Kaze Flex RGB LED fan with matching yellow decouplers completes the overall picture. The lighting can be controlled via Asus Aura Sync or similar software.

Для увеличения нажать на изображение

Mugen 5 CoolerMugen 5 CoolerMugen 5 CoolerMugen 5 CoolerMugen 5 CoolerMugen 5 CoolerMugen 5 CoolerMugen 5 CoolerMugen 5 CoolerMugen 5 CoolerMugen 5 CoolerMugen 5 CoolerMugen 5 CoolerMugen 5 CoolerMugen 5 CoolerMugen 5 CoolerMugen 5 CoolerMugen 5 CoolerMugen 5 Cooler

Характеристики

Model Name:
Mugen 5 TUF Gaming Alliance

Model Number:
SCMG-5100TUF

EAN: 4571225057088

Compatibility:
Intel®:
Socket LGA775
Socket LGA1150
Socket LGA1151
Socket LGA1155
Socket LGA1156
Socket LGA1366
Socket LGA2011 / 2011-v3 (Square ILM)
Socket LGA2066

AMD®:
Socket AM2
Socket AM2+
Socket AM3
Socket AM3+
Socket AM4
Socket FM1
Socket FM2
Socket FM2+


Overall Dimensions WxHxD
:
136 x 157,5 x 110,5 mm / 5.35 x 6.20 x 4.35 inch (including fan - more details)

Weight:
950 g / 33,51 oz

Accessory:
Mounting parts for Intel and AMD sockets, fan, fan clips, thermal grease, installation manual.

Baseplate Material / Heatpipes:
Nickel-plated copper (additional information)

Please note that an original backplate with screw mounting is needed for installation on mainboards with AMD sockets. Please check before buying if the backplate is fixed by screws (example)! If the backplate uses plastic-pins, mounting of this cooler is not possible.


Fan Specifications

Model Name:
Kaze Flex 120 RGB PWM

Dimensions:
120 x 120 x 27 mm / 4.72 x 4.72 x 1.06 inch

Noise Level:
4 ~ 24,9 dBA

Air Flow:
16,6 ~ 51.17 CFM / 28,2 ~ 86,93 m³/h

Fan Speed:
300 (±200 rpm) ~ 1.200 rpm (±10%) (PWM-controlled)

Static Pressure:
0,75 ~ 10,3 Pa / 0,076 ~ 1,05 mmH²O

Bearing Type:
Sealed Precision FDB

Voltage:
12V

MTTF:
120.000 Hours (25°C)

 

Обзоры

31-05-2019 HardwareInside (German)

02-03-2019 HardZones (Spanish)

04-02-2019 eTeknix (English)

 

Youtube

Особенности

TUF Gaming Alliance Design
The Mugen 5 TUF Gaming Alliance CPU Cooler combines the outstanding cooling performance of the Mugen 5 with the striking design of the Asus TUF Gaming Alliance series. RGB LED illumination, yellow design elements as well as the recurring TUF logo on the striking top plate and the fan, set visual accents that can be found on all TUF Gaming Alliance products. The illumination can be controlled via Asus Aura Sync or a similar control system.

 

Kaze Flex 120 RGB PWM Fan
The Mugen 5 Gaming Alliance is equipped with a PWM fan from the award-wining Kaze Flex series, operating in a range from 300 to 1.200 RPM. The self-contained liquid bearing (Sealed Precision FDB) reduces friction and wear to a minimum, resulting in an average lifespan of 120.000 hours. Rubber pads mounted in the fan frame have a decoupling effect and prevent the transfer of vibrations. Eight RGB LEDs arranged in a ring around the fan motor generate a consistent and powerful illumination of the translucent fan blades. The LEDs are operated by a standard 4-Pin RGB cable that can be directly controlled by common RGB system of various motherboard manufacturers.

 

Asymmetrical Design
Thanks to gently sloped heatpipes, the heat sink is not located directly above the bottom plate, but slightly offset to the rear. This asymmetrical design, in combination with a recess on the back of the heatsink, allows for unrestricted use of the memory banks. The high-quality cooper heatpipes and base-plate are completely nickel-plated.

 

H.P.M.S. III Mounting System
The cooler features the proven and easy-to-use Hyper Precision Mounting System III. A preassembled mounting bar simplifies the installation process, while spring-loaded screws prevent uneven pressure distribution. The mounting system supports all common sockets, including AMD®s AM4 and Intel®s Socket 2066. The Mugen 5 TUF Gaming Alliance package also includes an extra long screwdriver for easy mounting.

 

 

Награды