SimplyCool

 

FUMA 2

The Fuma 2 follows the design principle of its predecessor and offers a powerful twin-tower radiator with a completely revised, asymmetrical design. Six high-quality 6 mm heatpipes connect the two heatsinks to the solid copper baseplate. All copper parts were lavishly nickel plated. The asymmetric orientation and a recess on the back of the second cooling-block allow unrestricted use of all memory banks. The Fuma 2 comes with two PWM fans from the popular Kaze Flex series. In addition to a regular model, a new slim version with a frame width of 15 mm is also used. The Fuma 2 uses the principle of the "Dual Fan Reverse Airflow" design, in which the fans rotate in opposite directions. This creates a higher static pressure and an increased and more stable air flow. To further maximize cooling performance, an additional fan can be mounted. The required mounting brackets are included.

Для увеличения нажать на изображение

Fuma 2 CPU CoolerFuma 2 CPU CoolerFuma 2 CPU CoolerFuma 2 CPU CoolerFuma 2 CPU CoolerFuma 2 CPU CoolerFuma 2 CPU CoolerFuma 2 CPU CoolerFuma 2 CPU CoolerFuma 2 CPU Cooler

Характеристики

Наименование модели:
FUMA 2

Номер модели:
SCFM-2000

EAN: 4571225057200

Совместимость:
Intel®:

Сокет LGA775
Сокет LGA1150
Сокет LGA1151
Сокет LGA1155
Сокет LGA1156
Сокет LGA1366
Сокет LGA2011 (v3)
Сокет LGA2066

AMD®:
Сокет AM2
Сокет AM2+
Сокет AM3
Сокет AM3+
Сокет AM4
Сокет FM1
Сокет FM2
Сокет FM2+

Обратите внимание, что для установки кулера на материнские платы с AMD-сокетом используется оригинальная задняя пластина материнской платы.
Убедитесь перед покупкой кулера, что модель вашей материнской платы содержит крепёжную пластину с винтовой резьбой
(подробнее).
На мат.платы с пластиковыми штифтами установка кулера невозможна.

Общие габариты:
137 x 131 x 154,5 мм (с вентилятором - подробнее)

Вес:
1.000 г

Комплектующие:
Installation material for Intel™ and AMD™ Socket, thermal grease, fans, fan clips, installation manual, Y-PWM-cable, screwdriver

Материал подошвы кулера:
Никелированная медь (подробнее)


Характеристики вентилятора

Наименование модели:
Kaze Flex 120 Slim PWM (Fan 1)
Kaze Flex 120 PWM (Fan 2)

Номер модели:
SU1215FD12H-CNP
SU1225FD12M-CHP

Типоразмер вентилятора:
120 x 120 x 17 мм
120 x 120 x 27 мм

Уровень шума:
2,7 ~ 23,9 dBA
4,0 ~ 24,9 dBA

Воздушный поток:
8,28 ~ 33,86 CFM - 18,40 ~   75,24 m³/h
16,6 ~ 51,17 CFM - 36,89 ~ 113,71 m³/h

Скорость вращения:
300 (±200 об/мин) до 1.200 об/мин (±10%) с функцией ШИМ (PWM)

Статическое давление:
2,26 ~ 8,83 Pa / 0,23   ~ 0,9  mmH²O
0,75 ~ 10,3 Pa / 0,762 ~ 1,05 mmH²O

Тип подшипника:
Sealed Precision FDB

Voltage:
12 V

Amperage:
0,18 A
0,13 A

Особенности

Twin-Tower-Design
The classic twin-tower design of the Fuma 2 is not centered directly above the CPU socket, but offset by inclined heatpipes. This asymmetrical design provides maximum space for the memory banks. Also the cooling fins of the second tower are aligned in such a way that even memory banks on both sides of the CPU socket can be operated without problems, without restricting the effectiveness of the heat sink. Despite the enormous cooling surface of the Fuma 2 remains at a height of 154.5 mm and fits into any standard PC case.

 

Dual Fan Reverse Airflow
The Fuma 2 CPU cooler comes with two fans, a Kaze Flex 120 and a Kaze Flex Slim 120, which rotate in opposite directions. This creates a higher static pressure and an increased and more stable air flow. Furthermore a third fan can be mounted for extra power. Additional fan brackets are included.

 

Kaze Flex Fans
Both the regular model as well as the Kaze Flex Slim fan use a sealed fluid dynamic bearing (Sealed Precision FDB) that reduces friction and wear to a minimum thanks to a special oil film. Rubberized bearing surfaces have a decoupling effect and prevent the transmission of noise and vibrations.

 

H.P.M.S. III (Hyper Precision Mounting System III)
The Fuma 2 CPU cooler uses the proven H.P.M.S III mounting system. A pre-assembled mounting bar with spring-loaded screws ensures balanced pressure distribution. During the installation, the adaptable backplate is securely held to the mainboard by rubberized spacers, making the process considerably easier. The mounting system offers full compatibility with all current sockets including AMD's AM4 and Intel's LGA 2066.

 

 

 

Награды