Dual MB project with a Shuriken.

bluefront · #1 (**permalink**) 03-31-2008, 11:15 AM

Here's a new project I'm working on that uses two boards in one Lian Li case. One will be a low power board (the swing out side) using a Shuriken, and the other side uses a Thermalright XP-120. These are both low-profile heat-sinks, so there is no clearance problem between them. They are also off-set enough so the fans don't face each other.

The Shuriken works excellent on this P4-2.4. The fan is plenty quiet enough at it's minimum running voltage, which seems to be 8-9v.

The write-up to where the project stands right now is in the Gallery section of SPCR.

silentpcreview.com | View topic - Dual MB..... Rocketfish/Lian Li

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#1 (permalink) 03-31-2008, 11:15 AM
bluefront Member Join Date: Jul 2007 Location: St Louis, USA Posts: 58	Dual MB project with a Shuriken. Here's a new project I'm working on that uses two boards in one Lian Li case. One will be a low power board (the swing out side) using a Shuriken, and the other side uses a Thermalright XP-120. These are both low-profile heat-sinks, so there is no clearance problem between them. They are also off-set enough so the fans don't face each other. The Shuriken works excellent on this P4-2.4. The fan is plenty quiet enough at it's minimum running voltage, which seems to be 8-9v. The write-up to where the project stands right now is in the Gallery section of SPCR. silentpcreview.com \| View topic - Dual MB..... Rocketfish/Lian Li __________________ Peace and Quiet.