Shuriken optionnal 92mm

Cixisian · #1 (**permalink**) 03-12-2008, 06:12 PM

Hello,

In the description of the product Scythe website mention :

Optional Fan Mounting
Optional 92mm fan attachment is possible by using the included fan clip for more performance.

Does anyone know if any regular 92x92x25mm fan can be mounted ?

I would be very interested in mouting a Noctua NF-B9 on it.

Thanks

bluefront · #2 (**permalink**) 03-17-2008, 11:52 PM

A 92mm fan can be used with the supplied fan clips......but only if the corners of the fan are open, since the clips use the bottom flange.

If the fan has closed corners, they can be cut open with a Dremel and a cutting disk. Or....just attach the fan with zip-ties. Run a zip-tie through a corner hole of the fan and down between the fins. Run a second zip tie over the first. The second zip-tie acts like a nut. Snug it up and cut off the excess of the two zip-ties.

Shinigami · #3 (**permalink**) 03-19-2008, 03:31 PM

Hi,

yep it should work as bluefront has explained it. Nothing to add from my side. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#1 (permalink) 03-12-2008, 06:12 PM
Cixisian Junior Member Join Date: Mar 2008 Posts: 1	Shuriken optionnal 92mm Hello, In the description of the product Scythe website mention : Optional Fan Mounting Optional 92mm fan attachment is possible by using the included fan clip for more performance. Does anyone know if any regular 92x92x25mm fan can be mounted ? I would be very interested in mouting a Noctua NF-B9 on it. Thanks

#2 (permalink) 03-17-2008, 11:52 PM
bluefront Member Join Date: Jul 2007 Location: St Louis, USA Posts: 58	A 92mm fan can be used with the supplied fan clips......but only if the corners of the fan are open, since the clips use the bottom flange. If the fan has closed corners, they can be cut open with a Dremel and a cutting disk. Or....just attach the fan with zip-ties. Run a zip-tie through a corner hole of the fan and down between the fins. Run a second zip tie over the first. The second zip-tie acts like a nut. Snug it up and cut off the excess of the two zip-ties. __________________ Peace and Quiet.

#3 (permalink) 03-19-2008, 03:31 PM
Shinigami Marketing Join Date: Apr 2007 Location: Hamburg Posts: 865	Hi, yep it should work as bluefront has explained it. Nothing to add from my side. Thanks __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers