Project: OVERCOOL

[bluezone]

Right not a lot done on it tonight mostly just little bits.

Got the rear fan wire hider finished and grommet into it.


Goes into here. there is a hole in the bottom left end for the fan wires to go up into the wire hider.


Also got the grommet in the mobo installed so the fan wires can go behind the mobo tray.


Installed black thumb screws on PCI slots.


Got a coat of etc primer on the wire hider part and got my rear fan ready to install just got to get sum black heatshrink tomorrow. Also measure up the 5.25" bay side panel cover so i can get a sheet of alloy for it.

[bluezone]

Right got both orders today.


PSU.


All the cables for the PSU.


Arty photo.


Did sum work on the 5.25" bay side cover. Had to cut the alloy sheet down to fit and notch the little holes in the side.


Test fit is perfect.


This is what the notch's are for. To clear the rivets.


Tomorrow I plan to get the front of the case on to the case also work out a way to attach the 5.25" side bay cover. Got 1st coat of black onto the rear fan cable hider tonight also so should have that in case on monday night.

[bluezone]

PSU installed.




Cover to hide the rear fan wires.


I was black hammer hard paint on it. cool effect.


Installed. no more fan wire flying all over the show.


After thinking and looking at the case i removed 5 of the Scythe hdd coolers and now only going to have 3 as I couldnt ready install much hardware in the case.

Dont think anyone has ever done this with a hdd cooler. Installed all 3 into the 4 5.25" bays under the dvd drive standing on there ends so the wires go out the bottoms of the hdds.




Made 2 brakets to stop the hdd coolers moving and installed so soft padding on the tops on the brackets for the coolers to rest on.


Another update soon.

Thanks

[bluezone]

Another update. Had to sort out files.

Drill the holes for the middle hdd cooler mounts.


Installed a rubber grommet in the bottom of the 5.25" bays for cables.


Got the front of the case together and onto the case.


This is how the hdd cooler will go.


The cover for the side of the 5.25" bay. Also painted with the black hammer hard paint. Love the effects.


Sum photos of the case at moment.








I also throw a coat of the hammer hard paint on the front panel.


Will get sum nicer photos tomorrow after work.

[bluezone]

Right took sum photos of the case as it is at moment.














I also painted the front panel with the hammer hard black paint.

[ABi69]

Very nice work!!!

[nibbs]

Very nice m8. Love the blackish style of the case.