Need Some Help/Info

[Nervustwitch]

I really want to get this cooler but Im just not sure if its gonna fit in my case/setup.

I have an Antec 902 case with 120mm side fan installed running an EVGA GTX 285.

My worries are that the cooler will extend to far over the side of the vid card and into the side fan.Anyone know or have this setup? Can anyone tell the exact measurement the cooler extends past the side of the EVGA GTX 285? I f I know that then I would know for sure it will fit.

Thx for any help.

[Genghis99]

Notice (Threads are pictured):

http://www.scythe-eu.com/forum/setsu....html#post9444

http://www.scythe-eu.com/forum/setsu....html#post9313

[Nervustwitch]

Thx for the pics.

Just from those pics its kinda hard to tell,1 pic looks like it would work and the other pics in the second look like I need a super huge case,so Im still not sure.
Heres my measurement from the PCIe slot to the top of my side fan is about 5 1\2 -6 inches..im gonna have to remeasure to make sure of the exact..cant remember,but thats the info I need.

What I did was measure from top of PCIe slot to the back lip of my case,then measured the side fan and subtracted that difference from the 1st measurement.

I found measurements of the cooler but im not sure how they are measuring,just heatsink or the pipes and HS all the across.

[Genghis99]

Oh sorry - can you post the distances in metric units ? i'm german and to lazy ...

Setsugen is aproxx 55mm "higher" than my GTX275. A standard 285 should have same PCB size - but quite more TDP ...

[Nervustwitch]

Oh sorry,didnt think about you being in Germany.

Really if you could give me in mm's the amount the cooler extends over the edge of the card,Ill convert them myself...no biggie.

Also sorry to ask but its late here and im really tired but what does "TDP" stand for.

Thx again for the help.

[Genghis99]

Thermal design power - Wikipedia, the free encyclopedia