Cant get screws in my SQD2.5" (to mount in case)
This sounds like the same problem, but my german is very bad Link
But I can not get SCQ installed in my Lian Li V2110b using the normal screws I use for all my other drives. The screwholes are too small, I have tried with all kinds of screws and no one fits.
Are you using a none standard form? Because the mounting mechanism of my case makes me incapeable of using any other screws than those coming with my case (Which have standard size as they fit in all my other 3 drives)
A picture of mine though without screws in the red holes at that moment, they are not the problem though, only the blue marked ones.
Is there anything I can do?
Ps serial number: SQD2.5-000000069F
No support on this matter?
Sorry for our late respond.
We discuss this topic allready in German with other users and so the only thing I can say is: The quiet drive device based on the standard screws and holes. We can not support all the types some manufacturers develop for there own specific cases. its impossible. Sorry for that.
In this case you can make now holes for your screws or you trie to use the original screws.
If you have any aditional questions - let me know.
Chris Scythe EU GmbH
Well the screws from my case matches all my harddrives, so why they can't go into the SQD if that supports the standard size screw fittings I fail to understand
The SQD was designed to fit in normal 3.5 inch bays. And there are two types (standards) of screws. One with bigger thread and one with a smaller one. The SQD uses the smaller one. Normaly there are no problem in normal 3.5 inch bays but Lian Li uses the bigger ones for there bay system. Thats a problem we knew already and we try to fix it with upcoming items.
Scythe EU GmbH
|All times are GMT +1. The time now is 06:26 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyrights by Scythe EU GmbH - All rights reserved - 2007