The 140mm fan with normal square frame

[shaolin95]

Understand.
Ever considered doing a 230mm fan for those Cooler Master cases?
I guess the limited market could be a problem.

[regor]

Hi Shaolin95,
I had exacttly the same question, look at Larger Fans? page 2 and 3.
The official specs of the slipstream 1900 might probably be a little optimistic... hardware.info rated it more for 90 cfm than 110. The noise is pretty similar between kaze maru 1900 and slipstream 1900 @ 5 and 12 v; so the ratio cfm/db is always better for the kaze maru. I have both in my case and my personnal believing is in favor of the kaze (for 2 or 3 °C) on a heatsink (it was also demonstrated here on a mugen 1). But I would be also very interested in the results of a test of both @1900 on a mugen 2...
Values of static pressure of the slipstream are known :
500RPM -- 0.12mmH2O
800RPM -- 0.34mmH2O
1200RPM -- 0.92mmH2O
1600RPM -- 1.46mmH2O
1900RPM -- 2.30mmH2O
but not those of the kaze maru: Stefan or Chris
Cheers

[shaolin95]

Excellent info my friend.
I guess I will give it a shot and worst case scenario I will use it with another build so no harm done. :-)

[sumo]

Hello regor,

to provide all the informations about the fans is still "in progress", be surprised when its done.

Chris
Scythe EU GmbH

[regor]

Excellent. I can't wait...
Thanks a lot Chris