Ninja Plus RevB and FX60 and Lian-Li PCV-1200 PLUS

Frank S · #1 (**permalink**) 08-01-2008, 05:03 PM

Hi, hope someone can give me a bit of help/advice. I am doing a new build comprising of Ninja Plus Rev B, Asus A8N32-SLI Deluxe with an FX-60 and a Lian -Li pcv 1200 plus case.

Everything fits, however, it is not really practical to fit the fan on the Ninja with the Corsair 3500LL Pro series memory as the fan has to sit far to high up the cooler to clear the memory. The case appears very well ventilated (never used one of these before) it has a 12cm cpu fan, 12cm Gfx card fan
and a 12cm rear exhaust fan. Trying to determine if it's feasible to leave the fan off of the Ninja with this configuration, or am i asking for trouble ?

Here is an inside picture of the case which should hopefully help.
Any help advice much appreciated.
Regards Frank

hiroshige · #2 (**permalink**) 08-01-2008, 11:08 PM

Hello Frank,

there is a really easy way: Just try it without the fan and see, if the temperatures are okay.

Cheers,
Stefan

Frank S · #3 (**permalink**) 08-02-2008, 01:29 PM

Hello Stefan,
Thanks for your reply, that is what i was going to do, just wanted to confirm that it wasn't a definite no with that cpu.

Frank

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#1 (permalink) 08-01-2008, 05:03 PM
Frank S Junior Member Join Date: Aug 2008 Posts: 2	Ninja Plus RevB and FX60 and Lian-Li PCV-1200 PLUS Hi, hope someone can give me a bit of help/advice. I am doing a new build comprising of Ninja Plus Rev B, Asus A8N32-SLI Deluxe with an FX-60 and a Lian -Li pcv 1200 plus case. Everything fits, however, it is not really practical to fit the fan on the Ninja with the Corsair 3500LL Pro series memory as the fan has to sit far to high up the cooler to clear the memory. The case appears very well ventilated (never used one of these before) it has a 12cm cpu fan, 12cm Gfx card fan and a 12cm rear exhaust fan. Trying to determine if it's feasible to leave the fan off of the Ninja with this configuration, or am i asking for trouble ? Here is an inside picture of the case which should hopefully help. Any help advice much appreciated. Regards Frank

#2 (permalink) 08-01-2008, 11:08 PM
hiroshige Marketing & Support Join Date: May 2008 Location: Hamburg Posts: 541	Hello Frank, there is a really easy way: Just try it without the fan and see, if the temperatures are okay. Cheers, Stefan __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#3 (permalink) 08-02-2008, 01:29 PM
Frank S Junior Member Join Date: Aug 2008 Posts: 2	Hello Stefan, Thanks for your reply, that is what i was going to do, just wanted to confirm that it wasn't a definite no with that cpu. Frank