Scythe Ninja Cu and Asus P5E

saulos · #1 (**permalink**) 05-14-2008, 11:19 PM

I don't be able to mounting this cooler on that motherboard. Please help me, and sorry for my bad english.

hiroshige · #2 (**permalink**) 05-14-2008, 11:53 PM

Hi saulos,

what exactly means "I'm not able to mount"? Are there any parts on the Mainboard which don't allow mounting?

Cheers,
Stefan

saulos · #3 (**permalink**) 05-21-2008, 02:29 PM

Please tell me the right way to mounting the Scythe Ninja CU on my Asus P5E.

hiroshige · #4 (**permalink**) 05-21-2008, 02:39 PM

Hi saulos,

first of all I don't know if there is enough space for the Ninja CU on your P5E - actually, it should fit. First attach the Pushpin-Holders to the CPU-cooler using the provided screws. Now stick the pushpins trough the holes on the mainboard, press the black screws down.

That's it.

Cheers,
Stefan

hiroshige · #5 (**permalink**) 05-21-2008, 02:55 PM

Update: The Ninja is compatible with the P5E definetly.

Zepth · #6 (**permalink**) 05-25-2008, 09:16 PM

To confirm: The Ninja CU is 100% compatible with the Asus P5E (DDR2) motherboard. I have this running right now at the moment.

hiroshige · #7 (**permalink**) 05-26-2008, 09:54 AM

Thanks for your information!

Krawiec · #8 (**permalink**) 10-09-2008, 12:24 PM

Can I refresh the topic a little bit?

I plan to buy P5E deluxe mobo, OCZ reaper memory (with silent pipes and radiators) and ninja 2. I know that any blower just won't fit above ram (I plan on using Noctua NF-P12). But will it fit over processor power supply section? I want it to blow upwards, because the case will be Antec P182 which has additional top fan that can suck the hot air outside.

Logan · #9 (**permalink**) 10-27-2008, 08:32 PM

Quote:

Originally Posted by Krawiec

Can I refresh the topic a little bit?

I plan to buy P5E deluxe mobo, OCZ reaper memory (with silent pipes and radiators) and ninja 2. I know that any blower just won't fit above ram (I plan on using Noctua NF-P12). But will it fit over processor power supply section? I want it to blow upwards, because the case will be Antec P182 which has additional top fan that can suck the hot air outside.

Make sure you install befor you put the MOBO in the case. It is impossible to reach the top left pushpin with the mobo installed.

Krawiec · #10 (**permalink**) 10-27-2008, 09:34 PM

Quote:

Originally Posted by Logan

Make sure you install befor you put the MOBO in the case. It is impossible to reach the top left pushpin with the mobo installed.

Yes, I was planning to do that from the beginning (I saw pictures of ninja 2 on P5E in this case and there's no way my fingers would fit anywhere near processor).
But thanks anyway for the advice

#4 (permalink) 05-21-2008, 02:39 PM
hiroshige Marketing & Support Join Date: May 2008 Location: Hamburg Posts: 645	Hi saulos, first of all I don't know if there is enough space for the Ninja CU on your P5E - actually, it should fit. First attach the Pushpin-Holders to the CPU-cooler using the provided screws. Now stick the pushpins trough the holes on the mainboard, press the black screws down. That's it. Cheers, Stefan __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!
	Last edited by hiroshige; 05-21-2008 at 02:46 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#1 (permalink) 05-14-2008, 11:19 PM
saulos Junior Member Join Date: Mar 2008 Posts: 4	Scythe Ninja Cu and Asus P5E I don't be able to mounting this cooler on that motherboard. Please help me, and sorry for my bad english.

#2 (permalink) 05-14-2008, 11:53 PM
hiroshige Marketing & Support Join Date: May 2008 Location: Hamburg Posts: 645	Hi saulos, what exactly means "I'm not able to mount"? Are there any parts on the Mainboard which don't allow mounting? Cheers, Stefan __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#3 (permalink) 05-21-2008, 02:29 PM
saulos Junior Member Join Date: Mar 2008 Posts: 4	Please tell me the right way to mounting the Scythe Ninja CU on my Asus P5E.

#5 (permalink) 05-21-2008, 02:55 PM
hiroshige Marketing & Support Join Date: May 2008 Location: Hamburg Posts: 645	Update: The Ninja is compatible with the P5E definetly. __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#6 (permalink) 05-25-2008, 09:16 PM
Zepth Junior Member Join Date: May 2008 Posts: 2	To confirm: The Ninja CU is 100% compatible with the Asus P5E (DDR2) motherboard. I have this running right now at the moment.

#7 (permalink) 05-26-2008, 09:54 AM
hiroshige Marketing & Support Join Date: May 2008 Location: Hamburg Posts: 645	Thanks for your information! __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#8 (permalink) 10-09-2008, 12:24 PM
Krawiec Junior Member Join Date: Oct 2008 Posts: 6	Can I refresh the topic a little bit? I plan to buy P5E deluxe mobo, OCZ reaper memory (with silent pipes and radiators) and ninja 2. I know that any blower just won't fit above ram (I plan on using Noctua NF-P12). But will it fit over processor power supply section? I want it to blow upwards, because the case will be Antec P182 which has additional top fan that can suck the hot air outside.