Remount Ninja rev b on am2 socket ?

Ipsofacto · #1 (**permalink**) 03-18-2008, 06:31 PM

i need some advice on the best way to remove the ninja rev b from an
am2 socket - i need to change the cpu

Thanks in advance

Shinigami · #2 (**permalink**) 03-19-2008, 07:00 PM

Hey,

I don't know what the problem is. You can maybe use gripper(not sure if this is the proper name) but be careful. The easiest way is to simply unscrew the AM2 retention, then you reduce the pressure in a simple way! ;D

Report if the problem is solved that way pls.

Cheers,
Andy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#1 (permalink) 03-18-2008, 06:31 PM
Ipsofacto Junior Member Join Date: Mar 2008 Posts: 2	Remount Ninja rev b on am2 socket ? i need some advice on the best way to remove the ninja rev b from an am2 socket - i need to change the cpu Thanks in advance

#2 (permalink) 03-19-2008, 07:00 PM
Shinigami Marketing Join Date: Apr 2007 Location: Hamburg Posts: 874	Hey, I don't know what the problem is. You can maybe use gripper(not sure if this is the proper name) but be careful. The easiest way is to simply unscrew the AM2 retention, then you reduce the pressure in a simple way! ;D Report if the problem is solved that way pls. Cheers, Andy __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers