Fan placement

m980424 · #1 (**permalink**) 02-22-2008, 11:38 PM

Hi

I've a CPU cooler Scythe Ninja Plus Rev. B.

The rear fan is a Scythe Ultra Kaze 3000, and it's only 0,8 cm away from the ninja heatsink.

Where should I install the fan that comes with the cooler??

2 options:
Blow in - cooler - PSU fan
Blow in - cooler - rear fan

Thanks

EndoSteel · #2 (**permalink**) 02-23-2008, 06:51 AM

Probably you don't need that fan at all, given the exaust one is that close to the heatsink.

Shinigami · #3 (**permalink**) 02-26-2008, 03:31 PM

You could use it as a fan to get the hot air out of the case. If the temps are OK and you have no problems inside the case, then you can just not mount it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#1 (permalink) 02-22-2008, 11:38 PM
m980424 Junior Member Join Date: Feb 2008 Posts: 2	Fan placement Hi I've a CPU cooler Scythe Ninja Plus Rev. B. The rear fan is a Scythe Ultra Kaze 3000, and it's only 0,8 cm away from the ninja heatsink. Where should I install the fan that comes with the cooler?? 2 options: Blow in - cooler - PSU fan Blow in - cooler - rear fan Thanks

#2 (permalink) 02-23-2008, 06:51 AM
EndoSteel Member Join Date: Jul 2007 Location: Moscow, Russia Posts: 74	Probably you don't need that fan at all, given the exaust one is that close to the heatsink.

#3 (permalink) 02-26-2008, 03:31 PM
Shinigami Marketing Join Date: Apr 2007 Location: Hamburg Posts: 874	You could use it as a fan to get the hot air out of the case. If the temps are OK and you have no problems inside the case, then you can just not mount it. __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers