Ninja Plus retention kit

ckboon · #1 (**permalink**) 01-21-2008, 08:27 AM

Hi,

Can I use the Ninja Plus' retention kit for other Scythe cpu coolers?
Would there be a problem with spacing such that it's not a tight fit? I am thinking of using the kit on my ********.

Thanks for the help.

Shinigami · #2 (**permalink**) 01-21-2008, 04:42 PM

Hi,

******** is old name, please use "Mugen" instead. Thank you very much.

As for the Universal Retention Kit, it fits all Scythe CPU Coolers. The spacer can be also left out but then replace the insulation washers by thin insulation washers made of paper/plastic.

Cheers

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#1 (permalink) 01-21-2008, 08:27 AM
ckboon Junior Member Join Date: Aug 2007 Posts: 6	Ninja Plus retention kit Hi, Can I use the Ninja Plus' retention kit for other Scythe cpu coolers? Would there be a problem with spacing such that it's not a tight fit? I am thinking of using the kit on my ******. Thanks for the help. __________________ PC 1: Gigabyte P35-DS3R R1.0 \| Intel C2D E6420 + Scythe **** \| XV X1950Pro 512MB + DuOrb \| 2x1GB Adata DDR2-800 \| Creative X-Fi Platinum \| WinXP Pro Sp2 \| AOpen PrimaPower 700W \| Dell 2007WFP A03 LCD (DVI) \| CM Stacker 832 \| PC 2:** Gigabyte GA-8KNXP R2.0 \| Intel P4E 3.0GHz + Scythe Ninja+ \| PC X800XT 256MB VIVO + Zalman FS-V7 \| 2x512MB Geil DDR400 \| Creative Audigy 1 \| WinXP Pro Sp2 \| FSP BlueStormII 500W \| Dell 2007WFP A04 LCD (DVI) \|

#2 (permalink) 01-21-2008, 04:42 PM
Shinigami Marketing Join Date: Apr 2007 Location: Hamburg Posts: 874	Hi, ******** is old name, please use "Mugen" instead. Thank you very much. As for the Universal Retention Kit, it fits all Scythe CPU Coolers. The spacer can be also left out but then replace the insulation washers by thin insulation washers made of paper/plastic. Cheers __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers