Ninja mini klammern

[skuzzle]

Hey there!
I have a question concerning scythe ninja mini cooler.
i have an asus m2n32 sli deluxe mainboard with an am2 socket.
the problem is now that the scythe cooler comes with the metal assembly clip for socket am2 which has 2 clips on the side to hock it up on the retention bracket.
but the clips are adjusted to high over the hook of the ret. bracket so i put them in the middle because there are 3 possabilitys to adjust the clips in height.
well but it seems to me that the cooler is not that tight on the middle adjustment of the clip as it should be but the highest adjustment is not able to hook up the cooler on the retention bracket.
so should i force the clips on the highest level or should it go easily to hook it up ?

[Shinigami]

Why do we double posting here? Please see other thread for reply, Thanks.

[BlueStyle]

I have the same problems like skuzzle. But where is the other thread? Thanks

[Shinigami]

Hi BlueStyle,

check the following link please: Motherboard Compatibility List