[elziko]

I'm considering the Ninja PLUS for my new system but have a couple of questions:

1) Will Ninja PLUS the fit a Gigabyte GA-P31-DS3L motherboard fittend with a Intel Core 2 Quad Q6600?
2) I have a Coolermaster Cavalier 3 case which has an externaly measured width of 202mm - will the Ninja PLUS fit inside OK including the fan?

Thanks!

[Shinigami]

Hi elziko,

1.) Gigabyte GA-P31-DS3L is basically no problem with Ninja PLUS. The layout is clean and the compatibility chance should be around 93%. Q6600 is common and used by many people with Ninja PLUS.

2.) That is a bit too much, I don't have a PC Case stock. If the side panel is without any additional fans etc, then it will work out fine.

I hope this can help you. Let me know if you have any other questions.

[elziko]

Originally Posted by Shinigami

Hi elziko,

1.) Gigabyte GA-P31-DS3L is basically no problem with Ninja PLUS. The layout is clean and the compatibility chance should be around 93%. Q6600 is common and used by many people with Ninja PLUS.

2.) That is a bit too much, I don't have a PC Case stock. If the side panel is without any additional fans etc, then it will work out fine.

I hope this can help you. Let me know if you have any other questions.

Thanks for the reply - I have already bought this setup and confirm that everything fits on all counts.