Can't get this d*mn thing to work!

Benhur · #1 (**permalink**) 08-30-2008, 12:46 PM

OK, I've been trying to attach my brand new Scythe mugen/******** cooler to my brand new Asus P5Q-pro. I've been fiddling with it for at least three hours (no exaggeration) but I just can't seem to be able to push down the push-pins

. So, do any of you have any advice on how to attach the cooler to my mainboard? Kind of losing patience here....

hiroshige · #2 (**permalink**) 09-01-2008, 08:35 AM

Hello Benhur,

did you try to push down the pins without the mainboard if they can be pushed down?

I had the same mainboard and didn't have any problems when I was mounting my mugen...

Cheers,
Stefan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#1 (permalink) 08-30-2008, 12:46 PM
Benhur Junior Member Join Date: Aug 2008 Posts: 1	*Can't get this dmn thing to work! OK, I've been trying to attach my brand new Scythe mugen/****** cooler to my brand new Asus P5Q-pro. I've been fiddling with it for at least three hours (no exaggeration) but I just can't seem to be able to push down the push-pins . So, do any of you have any advice on how to attach the cooler to my mainboard? Kind of losing patience here....

#2 (permalink) 09-01-2008, 08:35 AM
hiroshige Marketing & Support Join Date: May 2008 Location: Hamburg Posts: 645	Hello Benhur, did you try to push down the pins without the mainboard if they can be pushed down? I had the same mainboard and didn't have any problems when I was mounting my mugen... Cheers, Stefan __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!