Mugen + (Asus) P5K3 Deluxe/Wifi/ap - Does it fit?

i43 · #1 (**permalink**) 04-09-2008, 06:57 PM

Hi all

My question is ( as above header )

Does Mugen fit on (Asus) P5K3 Deluxe/Wifi/ap MoBo?

i have looked into compatibility page, but P5K3 Deluxe/Wifi/ap is not listed

ok by visuals .. this board have quite similar heatpipe system around CPU socet like Striker, P5E3 xx or similar (Asus ROG) boards,
but this is only my wild guess .. by pictures from different review sites etc
currently i have the board (dismounted from chassis) and lay on my table so and i can do some measurements if it helps?
As i saw on other threads ( P5K ) there are also similar capasitors , located quite close to CPU socet, they are 14 mm from board (pcb) to capasitor top, but difficult to say measurements (gap) from cpu ihs to capasitor (top)
VR heatsinks and pipes are 40mm from board pcb and by mugen manual it should fit ( it say 48mm from bottom to lower fins )

so it would be nice to know can i use this cooler on that board? or not?
also nice, if somebody can confirm ... some links, pics ..

Thank you

Shinigami · #2 (**permalink**) 04-15-2008, 05:46 PM

Hello,

I saw the layout quit often, the Mugen should fit but it will not be really easy to fix the Push Pins. I can not really see a big problem besides this.

i43 · #3 (**permalink**) 04-17-2008, 02:33 PM

Hi Shinigami

Thank You for reply and confirmation!
i ordered it already but they were short at my local store, no problem have to wait a week or so

Shinigami · #4 (**permalink**) 04-18-2008, 02:07 PM

Ok, I hope everything will be fine and also that you are satisfied

#1 (permalink) 04-09-2008, 06:57 PM
i43 Junior Member Join Date: Apr 2008 Posts: 2	Mugen + (Asus) P5K3 Deluxe/Wifi/ap - Does it fit? Hi all My question is ( as above header ) Does Mugen fit on (Asus) P5K3 Deluxe/Wifi/ap MoBo? i have looked into compatibility page, but P5K3 Deluxe/Wifi/ap is not listed ok by visuals .. this board have quite similar heatpipe system around CPU socet like Striker, P5E3 xx or similar (Asus ROG) boards, but this is only my wild guess .. by pictures from different review sites etc currently i have the board (dismounted from chassis) and lay on my table so and i can do some measurements if it helps? As i saw on other threads ( P5K ) there are also similar capasitors , located quite close to CPU socet, they are 14 mm from board (pcb) to capasitor top, but difficult to say measurements (gap) from cpu ihs to capasitor (top) VR heatsinks and pipes are 40mm from board pcb and by mugen manual it should fit ( it say 48mm from bottom to lower fins ) so it would be nice to know can i use this cooler on that board? or not? also nice, if somebody can confirm ... some links, pics .. Thank you
	Last edited by i43; 04-09-2008 at 06:59 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#2 (permalink) 04-15-2008, 05:46 PM
Shinigami Marketing Join Date: Apr 2007 Location: Hamburg Posts: 874	Hello, I saw the layout quit often, the Mugen should fit but it will not be really easy to fix the Push Pins. I can not really see a big problem besides this. __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#3 (permalink) 04-17-2008, 02:33 PM
i43 Junior Member Join Date: Apr 2008 Posts: 2	Hi Shinigami Thank You for reply and confirmation! i ordered it already but they were short at my local store, no problem have to wait a week or so

#4 (permalink) 04-18-2008, 02:07 PM
Shinigami Marketing Join Date: Apr 2007 Location: Hamburg Posts: 874	Ok, I hope everything will be fine and also that you are satisfied __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers