[ploost]

hi!
i just wanna ask if the mugen fits into that chassis? if not, does the ninja pluss rev a fit? at my shop i can just take those 2, i would prefer the mugen, but i dont know if it fits....

[Shinigami]

Hi there,

I checked the dimensions and they seem to be 200mm from one side to the other. Mugen measures 160mm, so you have 40mm for Mainboard and the distance from case etc. I'd say it is really tight and it might fit, but I can not guarantee. If you have the PC Case already around, please measure the distance from the side panel to the motherboard, that is how you could get the more accurate answer. It is too difficult to answer the PC Case compatibility questions, because there are too many of them and too many factors that are not listed and influence by the manufacturer of the PC Case.

Cheers,
Andy

[ploost]

hmm jeah dont have it here hopefully it will work, there is no casecooler added in front of the cpu cooler, so there can be the "full place" of the 20 cm left... but 4 cm seems to be ok for me for the mobo and cpu, thx anyway, i will post it on 6th dec hopefully if i get the system then...

maybe one question left, the cooler seems to be so big, can i really use it without retention package? (thats what i wanna do)

edit: sry to add here more questions
if the new mugen cooler seems to be to loud for me, can i add a sflex 800 rpm on the mugen? and is it still enough power for quad 6600?

[Shinigami]

Hi,

You can post your results here, looking forward.

Most people actually used and use the Push-Pins. I did not have any big trouble with them, though they are difficult to mount with some Motherboards with crazy heatpipe coolers on them.

Mugen should be fine with S-FLKEX 800RPm and Q6600. If you are not satisfied with the temperature, improve the inside airflow, that usually helps a lot.

Andy