AOpen i975xa-YDG

[PCM] Incredible-olf · #1 (**permalink**) 09-03-2007, 01:24 PM

Hi guys,

you can add the board, named in the topic, to your compatiblity list.

Its not with 100% of preasure but i think thats not required on a non-hs cpu

Its performing as well as i expected:

Core Duo T2300 @ 2.0 Ghz

37�C / 34�C @ Core Temp 0.94 (Idle)

Without CPU-Fan

Shinigami · #2 (**permalink**) 09-03-2007, 02:36 PM

Hi and welcome [PCM] Incredible-olf.

I've just added the AOpen i975xa-YDG to the compatibility list. Thanks for your support. Yet the Pressure is a bit of a problem, the temps should be OK but then you can gain more if you could increase the pressure.

Greetings,
Andy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#1 (permalink) 09-03-2007, 01:24 PM
[PCM] Incredible-olf Junior Member Join Date: Sep 2007 Posts: 3	AOpen i975xa-YDG Hi guys, you can add the board, named in the topic, to your compatiblity list. Its not with 100% of preasure but i think thats not required on a non-hs cpu Its performing as well as i expected: Core Duo T2300 @ 2.0 Ghz 37�C / 34�C @ Core Temp 0.94 (Idle) Without CPU-Fan

#2 (permalink) 09-03-2007, 02:36 PM
Shinigami Marketing Join Date: Apr 2007 Location: Hamburg Posts: 874	Hi and welcome [PCM] Incredible-olf. I've just added the AOpen i975xa-YDG to the compatibility list. Thanks for your support. Yet the Pressure is a bit of a problem, the temps should be OK but then you can gain more if you could increase the pressure. Greetings, Andy __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers