Mugen Dimensions & Compatibility

hiroshige · #1 (**permalink**) 05-15-2008, 11:26 AM

Link to the Compatibility List

Please find the attached image with the most important dimensions.

Please be aware that there could be minor differences due to fault tolerances during the manufacturing process.

Oli · #2 (**permalink**) 05-15-2008, 12:08 PM

Great info!

Perhaps this would qualify for a "sticky" thread?

Bye Oli

hiroshige · #3 (**permalink**) 05-15-2008, 12:33 PM

It is sticky now

Shinigami · #4 (**permalink**) 05-15-2008, 06:09 PM

Yeah, finally I got some supporting person, he will help out more soon.

Stefan: Oli is really active in this forum and moderates some areas, he is from germany as well, as you might assume. So get along great

Oli · #5 (**permalink**) 05-16-2008, 08:15 AM

This will even improve Scythe support - good to hear!

hiroshige · #6 (**permalink**) 05-16-2008, 09:58 AM

Moin Oli,
sch�n dich kennen zu lernen

Oli · #7 (**permalink**) 05-16-2008, 10:26 AM

Gr��e aus dem Umland von Mainhatten nach HH!

Icehand · #8 (**permalink**) 06-23-2009, 01:52 PM

Hallo,
gr��e aus Emden.

Wenn ich das richtig rechne, hat der Mugen 2 eine Auflagefl�che (Basis) von 40mm (76-18-18mm) x 50mm (90-2x(3+17)mm)...richtig?
Zuvor hatte ich mir einen Artic Cooling freezer Extreme bestellt...der hatte nur eine Auflage von 31(!)mm x ca50mm. Das Teil hab ich gleich wieder zur�ck geschickt!
Mein AMD Phenom2 4X3000 940 hat einen Heatpreader von 38x38mm - den m�chte ich schlie�lich (wegen der 4 Kerne unter Vista ultimate 64) gut gek�hlt wissen!

Ich vertraue auf Eure Qualit�t und werde mir gleich den Mugen 2 bestellen.

Ich traue mich allerdings noch nicht mein System umzur�sten und mit dem Vista zu bespielen / die neue Performance zu genie�en...ich muss eine wichtige Arbeit schreiben (die zu wichtig f�r irgendwelche Probleme ist).

Ich schreib sp�ter mal wie es ausgegangen ist.

Bis die Tage

Panjoss · #9 (**permalink**) 07-30-2009, 03:37 PM

Hi everybody!!!!...i have ASUS M4A79T and CORSAIR XMS3 DHX TW3X4G1333C9DHX DDR3 rams and i wonder if i can put mugen 2 ..... perhaps i will have a problem with rams because are 2 close with cpu but i want your (professional opinion ) i upload photo to see what should will do...( http://i749.photobucket.com/albums/x...s/IMG_4196.jpg)

tribal123 · #10 (**permalink**) 08-05-2009, 01:23 PM

Hi folks,
i haven't found nowhere this info.
Does the Mugen first version (not the "2" version) is compatible with AM3 Socket and with the Asus M4A78T-E MAINBOARD?
tHANKS

#1 (permalink) 05-15-2008, 11:26 AM
hiroshige Marketing/Service Coordinator Join Date: May 2008 Location: Hamburg Posts: 988	Mugen Dimensions & Compatibility Link to the Compatibility List Please find the attached image with the most important dimensions. Please be aware that there could be minor differences due to fault tolerances during the manufacturing process. __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!
	Last edited by hiroshige; 05-16-2008 at 11:57 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#2 (permalink) 05-15-2008, 12:08 PM
Oli Senior Member Join Date: Aug 2007 Location: Germany, in the middle of Europe Posts: 851	Great info! Perhaps this would qualify for a "sticky" thread? Bye Oli __________________ - All comments relating to mainboard / cooler / case compatibility are based on "best guess". - - Aussagen zur K�hler-Kompatibilit�t basieren auf unverbindlicher, pers�nlicher Einsch�tzung. - C2D E6700@3.33Ghz@1,28V / Mugen 1, Ret Kit & 2x Slip Stream PWM @ 280rpm

#3 (permalink) 05-15-2008, 12:33 PM
hiroshige Marketing/Service Coordinator Join Date: May 2008 Location: Hamburg Posts: 988	It is sticky now __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#4 (permalink) 05-15-2008, 06:09 PM
Shinigami Product Manager Join Date: Apr 2007 Location: Hamburg Posts: 960	Yeah, finally I got some supporting person, he will help out more soon. Stefan: Oli is really active in this forum and moderates some areas, he is from germany as well, as you might assume. So get along great __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#5 (permalink) 05-16-2008, 08:15 AM
Oli Senior Member Join Date: Aug 2007 Location: Germany, in the middle of Europe Posts: 851	This will even improve Scythe support - good to hear! __________________ - All comments relating to mainboard / cooler / case compatibility are based on "best guess". - - Aussagen zur K�hler-Kompatibilit�t basieren auf unverbindlicher, pers�nlicher Einsch�tzung. - C2D E6700@3.33Ghz@1,28V / Mugen 1, Ret Kit & 2x Slip Stream PWM @ 280rpm

#6 (permalink) 05-16-2008, 09:58 AM
hiroshige Marketing/Service Coordinator Join Date: May 2008 Location: Hamburg Posts: 988	Moin Oli, sch�n dich kennen zu lernen __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#7 (permalink) 05-16-2008, 10:26 AM
Oli Senior Member Join Date: Aug 2007 Location: Germany, in the middle of Europe Posts: 851	Gr��e aus dem Umland von Mainhatten nach HH! __________________ - All comments relating to mainboard / cooler / case compatibility are based on "best guess". - - Aussagen zur K�hler-Kompatibilit�t basieren auf unverbindlicher, pers�nlicher Einsch�tzung. - C2D E6700@3.33Ghz@1,28V / Mugen 1, Ret Kit & 2x Slip Stream PWM @ 280rpm

#8 (permalink) 06-23-2009, 01:52 PM
Icehand Junior Member Join Date: Jun 2009 Location: EMD - GER Posts: 5	Hallo, gr��e aus Emden. Wenn ich das richtig rechne, hat der Mugen 2 eine Auflagefl�che (Basis) von 40mm (76-18-18mm) x 50mm (90-2x(3+17)mm)...richtig? Zuvor hatte ich mir einen Artic Cooling freezer Extreme bestellt...der hatte nur eine Auflage von 31(!)mm x ca50mm. Das Teil hab ich gleich wieder zur�ck geschickt! Mein AMD Phenom2 4X3000 940 hat einen Heatpreader von 38x38mm - den m�chte ich schlie�lich (wegen der 4 Kerne unter Vista ultimate 64) gut gek�hlt wissen! Ich vertraue auf Eure Qualit�t und werde mir gleich den Mugen 2 bestellen. Ich traue mich allerdings noch nicht mein System umzur�sten und mit dem Vista zu bespielen / die neue Performance zu genie�en...ich muss eine wichtige Arbeit schreiben (die zu wichtig f�r irgendwelche Probleme ist). Ich schreib sp�ter mal wie es ausgegangen ist. Bis die Tage

#9 (permalink) 07-30-2009, 03:37 PM
Panjoss Junior Member Join Date: Jul 2009 Location: Greece...in the middle of nowhere Posts: 1	Hi everybody!!!!...i have ASUS M4A79T and CORSAIR XMS3 DHX TW3X4G1333C9DHX DDR3 rams and i wonder if i can put mugen 2 ..... perhaps i will have a problem with rams because are 2 close with cpu but i want your (professional opinion ) i upload photo to see what should will do...( http://i749.photobucket.com/albums/x...s/IMG_4196.jpg)

#10 (permalink) 08-05-2009, 01:23 PM
tribal123 Junior Member Join Date: Aug 2009 Posts: 2	Hi folks, i haven't found nowhere this info. Does the Mugen first version (not the "2" version) is compatible with AM3 Socket and with the Asus M4A78T-E MAINBOARD? tHANKS