Mugen 2 Rev.B - Q9650

[Dima]

hi so recently i want to buy Mugen 2 Rev.B but the problem is i don't know if it will fit in my computer or will conflict with my RAM... my computer specs are:

Q9650
ASUS P5Q-E
G.Skill PI Black DDR2 4GB 1066Mhz
Sapphire HD5770 1GB
CoolerMaster CM690
Seasonic 620watt

Im really confused if it will fit or not
also im planning to get 2 fans and do a push/pull config.. if the cooler will fit of course.

[Okiwana Okimoto]

Hello Dima,

You need to use ram slot DIMM A1 and A2 right ? or you can place it into B1 and B2 ? If it is possible to use the two ram slots on right side (B1&B2), than I cannot see any problem =)

Regards,
OKI

[Dima]

no i need to use A1 and B1 or A2 and B2 here look:

http://img341.imageshack.us/img341/1258/05eb5.jpg

http://img175.imageshack.us/img175/9923/10qk0.jpg

and this is my memory:

http://images.bit-tech.net/content_i...066mhz/1-3.jpg

http://img150.imageshack.us/img150/6286/800c41rl9.jpg

[Dima]

:X?
aaaaaaaaaa

[Okiwana Okimoto]

Hey Dima,

I think it should be work with A2 and B2. If not my question is, if you can dismount the spreader ? Height heatspreader are only marketing and not really effective.

http://scythe-eu.com/fileadmin/Support/OKI/GEIL.jpg