Mugen 2 on Phenom 965 Be 140w oc

[Splash4004]

Hi.

Just wondering about the temps i should get using the Mugen 2 . Processor is at 3.6ghz , 1.42v - 1.44v.

Idle 40-42c and full load (Prime 95 for more than 10 min) 52-53c. Room temp is 22-23c.
To me these seem acceptable cause 140W phenom should run a bit hotter than the rest.

Amy feedback that includes temps would be appreciated. Thx.

[FL00D]

Originally Posted by Splash4004

Hi.

Just wondering about the temps i should get using the Mugen 2 . Processor is at 3.6ghz , 1.42v - 1.44v.

Idle 40-42c and full load (Prime 95 for more than 10 min) 52-53c. Room temp is 22-23c.
To me these seem acceptable cause 140W phenom should run a bit hotter than the rest.

Amy feedback that includes temps would be appreciated. Thx.

Hiya,

I'd love to see some temp results as well! I've got the very same CPU (965 C2 140W TDP) but it's @ 3.7GHz, default CPU Voltage. My readings: Idle 32-40C - full load (Prime 95 blend) 50-52C (will update this info when I get home, P95 blend has been running for 6hrs)

Cheers,

PS: TIM: AC MX3

[Splash4004]

Long time since i checked my thread.
Update: My processor is actually a 965 rev 3 so it,s 125W. It's now running @ 3.8ghz 1.35v (much lower than in my 1'st thread) With ambient tems of 23-24 it idle's @ 41-42 and loads (100% prime 95) @ 53-54. I'm suspecting that the stock thermal paste is't so good (to say it elegant). Also using just 1 fan on it (stock). Can any1 recomend 2 good fans for a push & pull setup? I'll also change the thermal paste when i replace the fans. Thx in advance,

[Oli]

Why not two Slipstream PWM in Push & Pull? Works very good and I am using MX2 paste ATM.

[Splash4004]

I was thinkin of that. Gonna order a pair of clips for the Hs and try that. Hmm ..i think i-ll also change the thermal paste. I'll be back with the results.
Edit: If anyone has experimented with different fans on the Mugen2 please make some recomandations. I'm looking for best CFM and low noise. I'm asking cause not all high cfm , low noise fans can do a good joob at cooling a radiator.