[Shinigami]

Due to a big demand for this list we are trying to keep this updated and accurate as possible. Please feel free to post images of possible and compatible motherboards.

The current list, which we try to keep up to date, can be also found in the Support corner of our website.

Color code:

• Compatible
• Not Compatible
• Unkown

Mine CPU Cooler

ASrock 939SLI32-eSATA2
ASRock P4i65G
ASRock 775Dual-VSTA
Abit AB9 QuadGT
Abit AW9D-MAX
Abit AW8D
Abit IB9
Abit AN8 SLI
Abit Fatal1ty AN9 32X
Abit AN9 32X
ABIT Fatal1ty FP-IN9 SLI
ASUS Commando
ASUS A8N-SLI Premium
ASUS A8R32-MVP
ASUS Striker Extreme
ASUS M2N32 SLI Deluxe
ASUS M2N-SLI Deluxe
ASUS M2N-E SLI
ASUS M2R 32 MVP
ASUS M2A-VM HDMI
ASUS M2R32-MVP
ASUS P5WD2-E Premium
ASUS P5B Deluxe
ASUS P5B
P5E3 (Details)
ASUS P5Q Deluxe
ASUS P5W DH Deluxe
ASUS P5N32-E SLi
ASUS P5N32-SLI Premium/WiFi-AP
ASUS P5LD2 Deluxe
Asus P4P800-SE
ASUS P5K AiLifestyle Series iP35 (Details)
Biostar TA690G AM2 (Original AM2 retention is non-standard)
DFI ******** P965-S
DFI LanParty NF4 Ultra D
Epox 8NPA + SLI
EVGA nForce 680i SLI
Foxconn Mars, P35 (Details)
Gigabyte GA-965P-DQ6
Gigabyte GA-965P-DS4
Gigabyte GA-965P-DS3P
Gigabyte GA-P35-DQ6
Gigabyte GA-P35-DS4
Gigabyte GA-P35T-DQ6
Gigabyte GA-P35-DS3P
Gigabyte GA-P35-DS3
Gigabyte GA-N650SLI-DS4
Gigabyte M56S-S3
Gigabyte GA-M55S-S3
Intel? D975XBX2
Intel? D975XBX
MSI 975X Platinum V.2
MSI 975X Platinum
MSI 945PL Neo-F
MSI 945P Platinum
MSI 945P Neo-F
MSI 945GZM3-L
MSI P6N Sli Platinum
MSI K9A Platinum
MSI K9AGM
MSI K9NG Neo
MSI K9NGM2
MSI K9NGM2-FID
MSI K9NU Neo-V
MSI K9N Neo-F
MSI K9N SLI
MSI K9N SLI Platinum
MSI K9N Platinum
MSI K9N Platinum (PCB 1.1)
MSI K9N Ultra
MSI K9N Diamond
MSI K9VGM-V
MSI K9N Neo-F (Details, new revision only 45° rotated Details)
MSI P35-Neo2 FR (Details, Details)
PC-Chips A33G (Original AM2 retention is non-standard)

Last Update: 06.06.2008

Every support is appreciated and would help other users as well so please feel free to supply any useful compatibility tips, pictures.

Disclaimer:
Please note that this compatibility may not apply to all the motherboards as the manufacturer randomly tend to change the components (capacitors, condensers, etc) used for their motherboard without informing to the public. Hence, the height of the capacitors and condensers maybe higher depending on the production lot of the motherboard.

[alryd]

MOTHERBOARD COMPATIBILITY:

MSI K9N Neo-F mobo, and Mine rev. B -- installed the cooler on this board in a standard ATX case without any problems. Very straightforward (using the AM2 clip set), with no mobo components in any danger of contact.

The only caveat is that the clip facing the PSU is awkward to clamp down with the PSU in place, especially if you've got big hands. Would definitely be easier with the PSU removed, but then you would need to be sure the cooler won't interfere with getting the PSU back in place!

[Shinigami]

Hi alryd,

Thanks for your message and confirming the compatibility.

[Sgt.Lapdance]

i use MSI P35-Neo2 FR

and it works very fine!!

nonOC E6750 @ Idle 33° ~ Load 50°

i use Artic Silver 5.

Best regards Scythe - well done job with the mine

Next time - i will post Pictures of my Sys...

[Shinigami]

Sgt.Lapdance:
Thanks for the confirmation. I updated the list. Looking forward to see your system images! ;D

Cheers,
Shinigami

[bill'o]

everything is in the title, someone knows something about the compatibility ?
thanks

[Shinigami]

Hi bill'o,

The compatibility should be OK. Mine is rather easy to mount even with such a crowded heatsink on the Mainboard. I would say 90% compatibility chance.

Cheers,
Andy

[bricabrac]

Hello,
Does Scythe Mine rev. B will fit in to Gigabyte EX38-DS5 motherboard ?
GIGABYTE GA-EX38-DS5
It has very big radiators (they looks like those in DQ6 version). I'm specially woried about capacitors near the cpu socket because they are aprox. 2mm higher than top of the socket. I'm afraid that Mine's "bottom" radiator (that mounted to the base) might touch capacitors and chokes.
And how about Ninja rev. B ?

[Shinigami]

Hi bricabrac!

Mine should be on the safe side with this Mobo but the capacitors are a bit of an issue I can not really help you with. In one direction you will see the Base plate to stick out more than the other side, which means you need to turn it so it is facing the side, where the capacitors are farther away (I/O Port side). Not sure the status, but the latest production should have this baseplate in a different direction, which would increase the compatibility chances. I will check our stock and the one in USA for that and report you.

Ninja PLUS should be fine right away.

[bricabrac]

Thank you for reply Shinigami. So I will wait then
But in this thread:

Compatibility Scythe Mine with Gigabyte GA EX38-DS5

hiroshige claims that Mine should fit perfectly. He also belongs to Scythe Support Staff so maybe he's right ?

This picture shows thing which I thought is radiator but maybe it's not But it looks like some kind of radiator. All in all, that thing should be shorter or even completly modified to looks similar to Zipang.