Mugen 2 & Mugen 2 Rev.B Compatibility List

[Oli]

As you can see on these pics the fan will hang above the DIMM slot closest to the CPU socket and probably over half of the second one.

[Showtime] Rechnersteckbriefe im PCGHX - Seite 3 - Die Hardware-Community für PC-Spieler - PC GAMES HARDWARE EXTREME

So I think you'll have to

a) mount the fan on another side of Mugen 2
b) if your case is wide enough, mount the fan in a higher position on Mugen 2 to get enough clearance for the Dominator's heatspreaders.

[Spera1990]

Originally Posted by Oli

According to other users the Mugen 2 fits on this board. As the heatsinks of the HyperX modules are rather short you also shouldn't get any problems with the fan, although it will hang above at least the module closest the the cpu socket - but this is perfectly ok.

thanks for the answer

[azimuth]

Hello,please can you tell me, if the ventirad scythe mugen 2 is compatible with the motherboards ASUS : P7P55D-E LX and P7H55-V chipset 1156 who are not in your compatibility list. Thanks for your informations.

[Ombro]

Hallo!
Does the Mugen 2 fit on a ASRock 890GM Pro3 (mATX, AMD 890GX)?

[Okiwana Okimoto]

Hello Ombro & azimuth,

ASRock 890GM Pro3 should be work, but if possible use some ram modules without height heatspreaders (Dominator). Asus P7P55D-E LX and P7H55-V same. It is every time the same question guys. You can switch fan and than it is ok or you buy normal ram without only for style needed heatspreaders , or everyone using DDR3-2200+ with hardcore timings and overlock

[bartu233]

Hello !
Does the Mugen 2 rev. B fit on a ASUS M4A88TD-V EVO/USB3 ?

[Oli]

Using Google with this expression
M4A88TD-V EVO/USB3 "Mugen 2"

I found the necessary results: AMD Processors Forums - Heat woes on 880- chipset almost frying

For the record, I am using an Asus M4A88TD-V EVO/USB3 (based on 880G) with a P2 955 BE cooled by a Mugen 2

So it fits.

[crishan]

Originally Posted by Floh

Also compatible with the Asus P5Q Deluxe.
The backplate overlaps the one of a mosfet heatsink but the soft foam on the backplate can compensate it without issues.

I tried this with the P5Q Deluxe, and

The backplate not only overlaps the backside (or better: underside)
of the mosfest cooler, it is almost impossible to tighten the screws
and even finding the thread when the backplate is partly overlaying
the mosfet coolers underside.

[Spera1990]

I ordered the mugen 2, when It arrive, I would put photos for having my motherboard GA-MA790X-UD3P .. and try to help others

[bartu233]

Oli, thx