02-12-2010, 05:20 PM
|
Junior Member
Join Date: Feb 2010
Posts: 1
|
Hey fellas,
just built the Mugen 2 on an ASRock A790GXH/128M AM2+ Board. No Problems occured so far, except if you want to use it with rams that got a tall passive cooler you have to mount the Mugen Fan on one of the other sides. If you do so any ram can be used.  I'll send in a picture later... Have to test now.  |
|
|
|
02-19-2010, 12:33 PM
|
Junior Member
Join Date: Mar 2009
Posts: 2
|
Hi Scythe Support Team,
ich habe wieder vor den Mugen 2 auf ein neues Board zu bringen. Wollte gerne meinen CPU Upgraden, dazu sollte es auch ein neues Bord geben. Da ihr mir ja schon in der Vergangenheit geholfen habt. Kurz um, wäre das Bord hier Kompatibel: ECS Web Site Bilder gibs auch auf der Web Site: ECS Web Site Mir machen sehr die Kühlkörper Richtung der Externen Anschlüsse Sorgen. Auf mein jetziges ECS Bord gab ich zum Glück keine Probleme. Wäre halt schade wenn der Kühler nicht passen würde. Wenn ihr noch mehr Angaben braucht, lasst es mich wissen. Wäre um eine Antwort dankbar. Grüße Jenny |
|
|
|
|
02-21-2010, 01:27 PM
|
Junior Member
Join Date: Feb 2010
Posts: 1
|
Asrock 4Core1600Twins-P35D
Hallo,
Kann mir jemand sagen ob der Mugen 2 auf ein Asrock 4Core1600Twins-P35D passt. ASRock > Products > 4Core1600Twins-P35D Der Speicher hat normale Höhe. |
|
|
|
|
02-25-2010, 07:57 PM
|
Junior Member
Join Date: Feb 2010
Posts: 2
|
ASUS P7P55S PRO with tall DIMM heatsinks
Will the Mugen-2 Rev.B fit on my ASUS p7P55D Pro motherboard. I am using 2x2GB Corsair XMS memory with 58mm tall heat sinks. You can see in the attached photo the closest edge of the closest memory heat sink is 65mm from the center of the stock Intel i5-750 cooling fan.
The eVGA 8800GTS graphics card is in PCIEx16 slot 1 and the closest edge of that card is 73mm from the center of the stock cooling fan. Will the Rev.B fit? I have seen several different answers on this board. |
|
|
|
|
03-06-2010, 09:17 PM
|
Junior Member
Join Date: Apr 2009
Location: Brazil
Posts: 5
|
Would be not compatible GA-P55A series with Mugen 2 (and Mugen 2 Rev. B)?
Achtung: Mugen 2 Rev. B passt nicht auf Gigabyte P55A-UD4 (Retention-Kit notwendig!) - Mindfactory AG Community Forum I am sorry for my bad english. |
|
|
|
|
03-16-2010, 01:13 PM
|
Junior Member
Join Date: Jul 2007
Posts: 3
|
I've got Mugen 2 Rev.A and the "Mounting Clip for LGA1156" (SCCSMG2-1156) and that is why, I presume, I won't have problems with the installation of the cooler on GA-P55A-UD4 (as I didn't have them with GA-P55-UD4). But, though the distance between the CPU-socket and the DIMM-sockets on the first board looks a bit greater than on the second, the fan clips are still hampered by the memory modules, notwithstanding those are the low ones (Hynix)
 Is there any idea how to cope with the problem without just mounting the fan on the opposite side of the cooler, as this last method seem to very noticeably low the Mugen 2 cooling effectiveness ? What makes me especially  and  is that with GA-P55/P55A-UD3 you don't have any of these problems, - but I cannot stay satisfied with them as I am going to have either SLI or CrossFire system ... |
|
|
|
|
03-24-2010, 06:39 AM
|
Junior Member
Join Date: Mar 2010
Posts: 1
|
Installed the Mugen 2 CPU Cooler on my ASUS Maximus 2 Formula mother board.
Not a problem at all CPU is Q9400. dropped my temps on all cores by 15 to 20c degrees.. With only 1 fan on it.. No load sits on 35c with load at 90% sits on 50c... Very Happy with it..  |
|
|
|
Linear Mode
