SimplyCool
1Likes
09-10-2009, 08:40 AM
|
|||
|
|||
Mugen 2 fits well on MSI X58-E Pro. The first memory slot is blocked by the heatsink when mounted in direction where fins are alongside with the memory slots in case you have Dominator-like mems. Cannot say if regular size mems will fit. However, the starting slot where the memory should be installed is the second one on the mobo so there is no problem with installing 3x2GB Dominaotors at the moment.
I had only two small issues. First, the *thing* is just massive and I had to fix small mobo bending by attaching the heatsing to the top of the case. Second, after replacing the mobo backplate, I tightened the cpu retention mechanism too much. Am I right the CPU retention mechanism should be somewhat loose before securing the CPU in place? Last edited by smelina; 09-10-2009 at 02:55 PM. 
|
|
09-13-2009, 08:44 AM
|
|||
|
|||
|
Hi all.
Does the Mugen 2 fit on a Gigabyte GA-P35C-DS3 (rev. 2.0) ? GIGABYTE - Product - Motherboard - Overview - GA-P35C-DS3 (rev. 2.0) I'm afraid about the Northbridge-Cooler, which is big on that MB and about first slot of RAM, which is used on my motherboard. Here is pictures of my motherboard:  
Last edited by togrul; 09-13-2009 at 08:50 AM.
|
|
09-22-2009, 07:49 AM
|
||||
|
||||
|
Jackson, bitte verkleinere dein Bild oder poste einen Thumbnail von abload.de o.ä. - danke!
__________________
- All comments relating to mainboard / cooler / case compatibility are based on "best guess". -
- Aussagen zur Kühler-Kompatibilität basieren auf unverbindlicher, persönlicher Einschätzung. - Push Postings will be deleted without notice.
|
|
10-01-2009, 12:18 PM
|
|||
|
|||
|
Sockel 1156-Mainboards
In einem anderem Forum wird davon berichtet, dass ca. ab November auch der Socket 1156 bedient wird. Nun habe ich schon den Mugen 2 bestellt und überlege ein 1156 Mainboard zu kaufen. Wird es von Scythe ein Kit geben mit dem ich dann ab November den Mugen einsetzten kann oder gibt es die Möglichkeit dann nur in der neuen Revision?
Wenn ich nicht nachkaufen kann würde ich schnell noch versuchen den Kauf zu stoppen und dann zu warten...
|
|
10-01-2009, 12:38 PM
|
||||
|
||||
|
Siehe: Is Mugen 2 Compatible with LGA1156?
Und: Mugen² Rev. A mit Sockel 1156 kompatibel? Das Kit soll also zwischen Oktober und November (oder spätestens im November) erscheinen und man kann den Mugen 2 damit nachrüsten ohne eine Rev B kaufen zu müssen.
__________________
- All comments relating to mainboard / cooler / case compatibility are based on "best guess". -
- Aussagen zur Kühler-Kompatibilität basieren auf unverbindlicher, persönlicher Einschätzung. - Push Postings will be deleted without notice.
|
|
10-02-2009, 02:41 PM
|
||||
|
||||
Hi to ALL. Yesterday i bought Mugen 2, and it fits well on my DFI LP UT P45-T2RS in the direction where fan is at the bottom of radiator.
 in a closer look 
__________________
C2D 6750@3.65 GHz@1.6V|Scythe Mugen 2|DFI LP UT P45-T2RS|4GB OCZ 1066/1150 MHz|1,2 TB HDD|Sapphire 4870 Toxic 1GB 820/4200 MHz|SB Audigy 2ZS|TT Shark Silver VA7000SWA|Chieftec 450AA-101A|Dell 2408WFP|Logitech G-15|Logitech G-9|Microlab AH-500 5.1 Last edited by MagneticField; 10-02-2009 at 02:51 PM.
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
