SimplyCool
1Likes
03-25-2009, 10:49 AM
|
||||
|
||||
Hello kuhar,
Welcome in our Scythe Support Forum- Thank you very much for your pictures and the info. Kind Regards Chris
__________________
|
|
03-25-2009, 08:48 PM
|
|||
|
|||
|
Hallo Leutz
Ich werde mir in kürze das ASUS P6T Deluxe mit Corei7 920 anschaffen. Natürlich ist meine Wahl des Cpu-Kühlers auf den Mugen 2 gefallen. Jetzt meine Frage. Ich stehe im Moment beim Arbeitsspeicher zwischen dem Corsair XMS3 6GB Kit und dem Dominator aus dem gleichen Haus. Der Dominator hat relativ hohe Heatspreader. Beim P6T wird Tripple-Channel Ram in der 2. , 4., und 6. Speicherbank eingebaut. Kann es da zu Platzproblemen kommen?
|
|
03-25-2009, 09:42 PM
|
|||
|
|||
|
Hi,
i was able to fit the scythe mugen 2 into my P5Q pro with all slots full of dominator memory... i had to push and pull and bend the retention brackets, but its on and working now.... Method: bolt the mugen 2 on your cpu ( with thermalpaste), then put in the first stick of dominator ( closest to the hs), then put on 1 bracket, then push the other one in place ( you will need to use force, and you ram stick will be rock solid pushed into the ram socket)... thats how i did it boonet
|
|
03-26-2009, 09:24 AM
|
||||
|
||||
|
Hello all,
@mirosik Willkommen hier im Forum. In dem Fall würd ich klar zu dem XMS3 6GB Kit greifen, da sich dort die Heatspreader abschrauben lassen und du somit keine Probleme mehr hast. Selbiges haben wir in einem unserer Testsysteme auf der Cebit getan - hat super funktioniert. Wir mussten dabei vom ersten Modul den HS entfernen um den Lüfter montieren zu können. Hitze Probleme oder ähnliches sind dabei nicht aufgetreten. @boonet thx for your explanations... it sounds strange, but if it works well in your system, why not. Can you make some picturen for us? Kind Regards Chris
__________________
|
|
03-26-2009, 05:43 PM
|
|||
|
|||
|
sure, the only thing is that the fan is now pushed above the cooler ( so air is not used optimally)... What can you tell me about the temps i should get with this cooler when oc'ing an q9550 to 4Ghz at 1.38125... i have now with prime large fft's 68-68-61-63, how can i make those temps even, i did evrything, without lapping cpu (would this help maybe) ?
tonight ill post some pics on it... boonet Last edited by boonet; 03-26-2009 at 05:47 PM.
|
|
03-26-2009, 08:52 PM
|
|||
|
|||
|
http://i561.photobucket.com/albums/s...t/DSC00895.jpg
http://i561.photobucket.com/albums/s...t/DSC00898.jpg http://i561.photobucket.com/albums/s...t/DSC00899.jpg http://i561.photobucket.com/albums/s...t/DSC00900.jpg these are the pics i took from the mugen 2 inside the P5Q pro, with 4 dominators... Can someone of scyth pls help me with my temps: im not satisfied, my core is running at 1.36875 temps in linx: 83-83-78-77 i think thats a bit to high no? should i lap it or not? boonet
|
|
03-27-2009, 08:51 AM
|
||||
|
||||
|
Hello boonet,
its a little bit confusing, but what are your temps now: 1. q9550 to 4Ghz/ 1.38 / 68-68-61-63°C 2. 1.36875 / 83-83-78-77 its maybe a effect of the fan position or maybe the hs of your CPU. First what i would do is, remove 2 memory sticks and try it with a better fan position. If this will not work better, try to leap your heatspreader. Kind Regards Chris
__________________
|
|
03-27-2009, 06:16 PM
|
|||
|
|||
|
Ok, srry for confusement: temps are now with vcore at 1.36825:
prime large fft's: 60-60-51-55 linx: 85-85-78-78 especially the difference between the temps are not as i would like to see it, the hight isn't to nice either... if i can find the right sandpaper i think im going to lap the cpu, do i have lap the heatsink also?? boonet
|
|
03-27-2009, 09:42 PM
|
|||
|
|||
|
Hi Chris,
wie Versprochen hier die Erfolgsmeldung: Passt auf Asus M3N-HT Deluxe. 2 RAM Bänke werden überdeckt vom Lüfter, aber das ist nicht wild da die eh nicht getauscht werden sollen.  Nun ist die MB Temperatur höher da die Heat-Pipe Konstruktion vom MB nun so gut wie "keinen" Luftstrom mehr vom CPU Kühler bekommt (hinten dran ist direkt der Gehäuselüfter und zieht die CPU Luft direkt raus. Mal kucken wie schlimm, aber ich bin guter Dinge  VG
|
|
03-27-2009, 11:04 PM
|
|||
|
|||
|
Hello!
I can confirm that the Mugen 2 fits perfectly on the DFI Lanparty DK P45 T2RS Plus. You can even use the first ram dimm if you mound the fan as high as you can. It is simply awesome. If anyone needs any pictures please let me know and I'll be happy to post them for you.
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
