Mugen 2 Compatibility List - Page 3

JackSparrow · #21 (**permalink**) 01-28-2009, 11:40 AM

Mugen2 on MSI P45 Neo3-FR
MSI Technology GmbH - innovation with style

hiroshige · #22 (**permalink**) 01-28-2009, 11:42 AM

Hello JackSparrow,

does this mean that you would like to know, if it fits?

Cheers,
Stefan - Scythe EU Hamburg

JackSparrow · #23 (**permalink**) 01-28-2009, 11:44 AM

Yes I mean it

hiroshige · #24 (**permalink**) 01-28-2009, 11:46 AM

Hello,

Mugen 2 will fit without any issues.

Cheers,
Stefan - Scythe EU Hamburg

JackSparrow · #25 (**permalink**) 01-28-2009, 11:56 AM

Then thank you for the infos it will try out and announce me then over again.
If I can write here also in in German or it must be English in.

hiroshige · #26 (**permalink**) 01-28-2009, 11:58 AM

Hello JackSparrow,

english and german both is okay.

Stefan - Scythe EU Hamburg

inuh · #27 (**permalink**) 01-28-2009, 02:16 PM

Hi Stefan,

are there any reports so far about (successfully) mounting the "MUGEN 2" to a "MSI P35 NEO2 FR/FIR" board?

If not, i'll try to measure it off on that board tonight.

Thanks!

hiroshige · #28 (**permalink**) 01-28-2009, 02:20 PM

Hey inuh,

could be very close but should work.

Kind regards,
Stefan - Scythe EU Hamburg

inuh · #29 (**permalink**) 01-28-2009, 03:31 PM

Thanks for the very fast reply!

Do you mean that it could get very close to the RAM-Banks or the NB-Cooler?

I think i'll give it a try and post my results with it.

hiroshige · #30 (**permalink**) 01-29-2009, 10:54 AM

Hello inuh,

both could be quite close, but should fit.

Stefan - Scythe EU Hamburg

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#21 (permalink) 01-28-2009, 11:40 AM
JackSparrow Junior Member Join Date: Jan 2009 Posts: 8	Mugen2 on MSI P45 Neo3-FR MSI Technology GmbH - innovation with style

#22 (permalink) 01-28-2009, 11:42 AM
hiroshige Marketing/Service Coordinator Join Date: May 2008 Location: Hamburg Posts: 988	Hello JackSparrow, does this mean that you would like to know, if it fits? Cheers, Stefan - Scythe EU Hamburg __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#23 (permalink) 01-28-2009, 11:44 AM
JackSparrow Junior Member Join Date: Jan 2009 Posts: 8	Yes I mean it

#24 (permalink) 01-28-2009, 11:46 AM
hiroshige Marketing/Service Coordinator Join Date: May 2008 Location: Hamburg Posts: 988	Hello, Mugen 2 will fit without any issues. Cheers, Stefan - Scythe EU Hamburg __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#25 (permalink) 01-28-2009, 11:56 AM
JackSparrow Junior Member Join Date: Jan 2009 Posts: 8	Then thank you for the infos it will try out and announce me then over again. If I can write here also in in German or it must be English in.

#26 (permalink) 01-28-2009, 11:58 AM
hiroshige Marketing/Service Coordinator Join Date: May 2008 Location: Hamburg Posts: 988	Hello JackSparrow, english and german both is okay. Stefan - Scythe EU Hamburg __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#27 (permalink) 01-28-2009, 02:16 PM
inuh Junior Member Join Date: Jan 2009 Posts: 3	Hi Stefan, are there any reports so far about (successfully) mounting the "MUGEN 2" to a "MSI P35 NEO2 FR/FIR" board? If not, i'll try to measure it off on that board tonight. Thanks!

#28 (permalink) 01-28-2009, 02:20 PM
hiroshige Marketing/Service Coordinator Join Date: May 2008 Location: Hamburg Posts: 988	Hey inuh, could be very close but should work. Kind regards, Stefan - Scythe EU Hamburg __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#29 (permalink) 01-28-2009, 03:31 PM
inuh Junior Member Join Date: Jan 2009 Posts: 3	Thanks for the very fast reply! Do you mean that it could get very close to the RAM-Banks or the NB-Cooler? I think i'll give it a try and post my results with it.

#30 (permalink) 01-29-2009, 10:54 AM
hiroshige Marketing/Service Coordinator Join Date: May 2008 Location: Hamburg Posts: 988	Hello inuh, both could be quite close, but should fit. Stefan - Scythe EU Hamburg __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!