Andy Samurai Master Compatibility List - Page 6

hiroshige · #51 (**permalink**) 07-23-2008, 02:25 PM

Here are some pictures of Andy Samurai Master with Gigabyte EX38-DS4 which has the same layout as the X48 as far as i could see from pictures.

Andy fits in 3 of 4 orientations, only with heatpipes to northbridge there is a problem - all others are okay.

fragerdaz · #52 (**permalink**) 07-23-2008, 03:06 PM

Quote:

Originally Posted by hiroshige

Here are some pictures of Andy Samurai Master with Gigabyte EX38-DS4 which has the same layout as the X48 as far as i could see from pictures.

Andy fits in 3 of 4 orientations, only with heatpipes to northbridge there is a problem - all others are okay.

Thanks for the reply and pictures !!

You wouldn't happen to have the same pictures but from above (looking directly down on motherboard) to see how far the HS and pipes go?

New_Escaflowne · #53 (**permalink**) 08-04-2008, 03:37 PM

hi.

i would like to know if i can use the Scythe Andy Samurai Master with the Gigabyte GA-EP45-DS3P motherboard or are there any problems (e.g. can't use, can only use with one direction, can use but RAM-slot or PCIe-slot or another slot can't be used at the same time).

here is a link to the official Gigybyte GA-EP45-DS3P website: LINK

New_Escaflowne

hiroshige · #54 (**permalink**) 08-05-2008, 07:46 AM

Hello Escaflowne,

as far as I could see from pictures, Andy should fit in 2 or 3 directions.

Cheers,
Stefan

New_Escaflowne · #55 (**permalink**) 08-05-2008, 12:09 PM

ok, thanks for the reply. i also read in another forum that someone is using a GA-EP45-DS3P with the Andy Samurai Master, so i'm confident that it fits ^^ New_Escaflowne

hiroshige · #56 (**permalink**) 08-05-2008, 12:12 PM

Please post some pictures when you built our Andy into your case!

New_Escaflowne · #57 (**permalink**) 08-05-2008, 02:31 PM

yeah, i will.
but it will take a while, because i have to wait for all my hardware to come first.

New_Escaflowne

FroMMars · #58 (**permalink**) 08-07-2008, 02:20 PM

hellow

What can u say about compability of Andy Samurai Master and MB ASUS M2V-MX ?
because i cant see it in the list =)

sumo · #59 (**permalink**) 08-07-2008, 03:33 PM

Hy,

in my opinion, you could get problems regarding to the distance between the CPU Socket and NB Heatsink.

Option 1: You can remove the Heatsink from your NB, put the Andy Samurai on your Socket and than you replace the NB Cooler.

Option 2: An other way is to put the cooler on the cpu socket and try to press the "right" Clip at first under the nose of the bracket. than try to fix the other side.

im not sure thats enough space on this Motherboard for option 2, but option 1 should work fine.

MFG Sumo

Eastpak1984 · #60 (**permalink**) 08-09-2008, 07:16 PM

Hi,

I have a P5K Premium/WiFi AP, and I plan to buy the Andy Samurai Master, but i dont't know, wheather it fits.

I think the P5K Deluxe and the P5K Premium/WiFi AP use the same heatpipe, so it could fit. But I want to be sure.

Who knows more?

PS: I want to use the Universal Retention Kit, not the Push Pins.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#53 (permalink) 08-04-2008, 03:37 PM
New_Escaflowne Junior Member Join Date: Aug 2008 Posts: 7	hi. i would like to know if i can use the Scythe Andy Samurai Master with the Gigabyte GA-EP45-DS3P motherboard or are there any problems (e.g. can't use, can only use with one direction, can use but RAM-slot or PCIe-slot or another slot can't be used at the same time). here is a link to the official Gigybyte GA-EP45-DS3P website: LINK New_Escaflowne

#54 (permalink) 08-05-2008, 07:46 AM
hiroshige Marketing & Support Join Date: May 2008 Location: Hamburg Posts: 521	Hello Escaflowne, as far as I could see from pictures, Andy should fit in 2 or 3 directions. Cheers, Stefan __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#55 (permalink) 08-05-2008, 12:09 PM
New_Escaflowne Junior Member Join Date: Aug 2008 Posts: 7	ok, thanks for the reply. i also read in another forum that someone is using a GA-EP45-DS3P with the Andy Samurai Master, so i'm confident that it fits ^^ New_Escaflowne

#56 (permalink) 08-05-2008, 12:12 PM
hiroshige Marketing & Support Join Date: May 2008 Location: Hamburg Posts: 521	Please post some pictures when you built our Andy into your case! __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#57 (permalink) 08-05-2008, 02:31 PM
New_Escaflowne Junior Member Join Date: Aug 2008 Posts: 7	yeah, i will. but it will take a while, because i have to wait for all my hardware to come first. New_Escaflowne

#58 (permalink) 08-07-2008, 02:20 PM
FroMMars Junior Member Join Date: Aug 2008 Posts: 4	hellow What can u say about compability of Andy Samurai Master and MB ASUS M2V-MX ? because i cant see it in the list =)

#59 (permalink) 08-07-2008, 03:33 PM
sumo Product Manager Assistant Join Date: Aug 2008 Location: Hamburg Posts: 40	Hy, in my opinion, you could get problems regarding to the distance between the CPU Socket and NB Heatsink. Option 1: You can remove the Heatsink from your NB, put the Andy Samurai on your Socket and than you replace the NB Cooler. Option 2: An other way is to put the cooler on the cpu socket and try to press the "right" Clip at first under the nose of the bracket. than try to fix the other side. im not sure thats enough space on this Motherboard for option 2, but option 1 should work fine. MFG Sumo __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#60 (permalink) 08-09-2008, 07:16 PM
Eastpak1984 Junior Member Join Date: Aug 2008 Posts: 2	Hi, I have a P5K Premium/WiFi AP, and I plan to buy the Andy Samurai Master, but i dont't know, wheather it fits. I think the P5K Deluxe and the P5K Premium/WiFi AP use the same heatpipe, so it could fit. But I want to be sure. Who knows more? PS: I want to use the Universal Retention Kit, not the Push Pins.
	Last edited by Eastpak1984; 08-09-2008 at 07:41 PM.