Andy Samurai Master Compatibility List

[The_Unknown]

Hello folks,

I just installed my new mainboard Gigabyte GA-P55-UD3 and onto that my Andy Samurai Master with the 1366/1156-VMTS-Retention Kit without any problems. Fits just great

[brandon]

Originally Posted by The_Unknown

1366/1156-VMTS-Retention Kit

What is it? Is that original Scythe Kit or something handemaded?

[Oli]

http://www.scythe-eu.com/en/products...ing-clips.html

[lenco12]

Originally Posted by Grossmeister

Shinigami
What can you say about compability with Gigabyte GA-MA69G-S3H? It seems that its impossible to put heatpipes above the capacitors, but I don't know is it possible to put them above the RAM without moving RAM modules to slots 3 and 4.

I think it won't block the RAM but it can even go to the direction of the capacitors. I looked at a similar mobo and the Andy Samurai Master Cooler, it looked fine, so I think it will work both ways. Should be compatible to Gigabyte GA-MA69G-S3H.

[SinglePoster]

Originally Posted by The_Unknown

Hello folks,

I just installed my new mainboard Gigabyte GA-P55-UD3 and onto that my Andy Samurai Master with the 1366/1156-VMTS-Retention Kit without any problems. Fits just great

Works also fine on the Gigabyte P55A-UD4 rev1.00.

The retention kit is a good idea! Thank you Scythe

Originally Posted by Shinigami

Hi,

BIOSTAR AM2 Mobos are not compatible but the reason is their Retention Module, it is not comaptible to VTMS. We have modified our VTMS Clips recently to solve the problem, as we don't expect BIOSTAR to react anytime. Gigabyte is one the safer side so ASM should work as mentioned before. I can ask Gigabyte for that Mobo along with Other AM2 Mobos...

Greets

Thank you, but nevertheless I decided to buy Ninja Plus because of 2 reasons:
1. I can't try ASM and give it back if I won't be able to install it.
2. I like to put all my fans to +5V, and in this case Ninja Plus should be more efficient due to the bigger space between fins.

[SyNinja77]

sto per ordinare questo ANDY SAMURAI MASTER per la mia asrock P4i65G.

ho però un dubbio: non è che le heat-pipes vanno a sbattere contro il dissipatore del chipset?

[Okiwana Okimoto]

Hello SyNinja77,

it should be not a problem to fit the Andy Samurai one your Asrock Mainboard.

Regards,
OKI

[SyNinja77]

Originally Posted by Okiwana Okimoto

Hello SyNinja77,

it should be not a problem to fit the Andy Samurai one your Asrock Mainboard.

Regards,
OKI

Very thanks Okiwana! I have buy online the Andy Samurai yesterday

[SyNinja77]

now I have the scythe andy samurai master.
but the chipset heatsink is very high and I can not install my new cpu coolers