Ninja PLUS Rev. B Compatibility List - Page 6

Shinigami · #51 (**permalink**) 01-03-2008, 10:32 AM

Hi everyone. We wish you a happy New Year.

sbrundell: Abit IP35 Pro should be compatible as well, because the heatsink does not look significant bigger.

Backfixer: Thanks for confirming the compatibility to the ASUS A8N32-SLI Deluxe. I can only find the Deluxe version, so I assume you meant Deluxe version.

chliJs: It does look safe to me. I would say the chances are 93% that it will fit w/o any problems. The heatsink is not really a bother here. I can not guarantee for capacitors, because of the manufacturing tolerances and revisions of the Mobo.

Aky: ASUS A8N-E should be fine with Ninja PLUS. I can only assume that some capacitor's could interfere but this depends on the manufacturing tolerance.

Cheers,
Andy

Aky · #52 (**permalink**) 01-03-2008, 11:15 AM

Thank you for your answer !

Happy new year to you and all Scythe !

Just something to help if someone else has an A8N-E, I found an image of Ninja Plus RevB on A8N-E motherboard, and it's not totally compatible :
http://img525.imageshack.us/img525/5576/cimg1933ab8.jpg

Personnally, I will wait the new Ninja Cu and I hope it will be without problem

Thank you !

Shinigami · #53 (**permalink**) 01-03-2008, 01:02 PM

Hi Aky,

Thanks for the confirmation. The capacitors problem is some pain with 939,940 and AM sockets.

Ninja CU has a different Heatpipe construction, should be better then.

Andy

s_l · #54 (**permalink**) 01-06-2008, 10:37 AM

Hi,

Can anyone confirm whether this heatsink is compatitable with the following board:GA-8IPE1000 (rev. 1.x)

Shinigami · #55 (**permalink**) 01-11-2008, 09:08 PM

Hi S_l,

The GA-8IPE1000 seems to be ok but the typical problem are the older type of capacitors which are close to the retention and Ninja PLUS Heatpipes would touch them, so you "might need" to push the capacitors a bit away. Besides this, there seem to be no problems with the Mainboard.

steglits · #56 (**permalink**) 01-11-2008, 10:48 PM

How about ASUS P5E? Can Ninja rev B be mounted?

Tomas

Shinigami · #57 (**permalink**) 01-12-2008, 12:37 AM

steglits: ASUS P5E looks pretty good with the design, simple and not crazy Heatpipe-construction. Should be fine with Ninja Plus.

Stefan · #58 (**permalink**) 01-13-2008, 06:59 PM

Hello!

I'm searching desperately for a ultra silent cpu cooler that fits on the MSI K9N Neo V3. Problem is, that the memory banks are VERY close to the cpu socket.

Does the Scythe Ninja PLUS Rev. B or the Scythe Mugen fit this Board?

Also I would be VERY happy, if you could provide some information about the dimentions of the heatsink & cooler of the Ninja and the Mugen. I don't mean the dimentions over all, but the dimentions at the base of the heatsink.

At the MSI K9N Neo V3 I have 15mm from the edge of the cpu-socket to the first memory bank. (From the edge of the black heatsink mounting bracket it's only 3mm to the memory modules. That's damn narrow!) The memory module is 30mm high (if memory is built in). So does ANY of the Scythe cpu heatsinks fit on this constellation?

Your help ist very appreciated!

Thanks in advance.

Stefan

chmavr · #59 (**permalink**) 01-18-2008, 02:13 PM

greetings to everyone!
i m looking forward to buy a ninja plus for a p4 prescott 3.0Gh and do some overclock on it...my mobo its an MSI 865PE NEO2 flsr series...will fit the ninja???i dont think that i will have a problem but i have to be sure of it!
thanks in advance!

Shinigami · #60 (**permalink**) 01-21-2008, 01:37 PM

Hello,

Stefan:: Ninja PLUS and Mugen should be fine with the mentioned Mobo. I can not see any problems. As for dimensions please check the following.
http://www.scythe-eu.com/forum/ninja...imensions.html
Mugen's first fins start at 36mm measured from the base-plate.

So basically the RAM should be OK because the fins are taller.

chmavr: MSI 865PE NEO2 flsr should be fine with Ninja PLUS. I can not see any issue here. I can never guarantee but it should be fine

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#51 (permalink) 01-03-2008, 10:32 AM
Shinigami Marketing & Support Join Date: Apr 2007 Location: Hamburg Posts: 848	Hi everyone. We wish you a happy New Year. sbrundell: Abit IP35 Pro should be compatible as well, because the heatsink does not look significant bigger. Backfixer: Thanks for confirming the compatibility to the ASUS A8N32-SLI Deluxe. I can only find the Deluxe version, so I assume you meant Deluxe version. chliJs: It does look safe to me. I would say the chances are 93% that it will fit w/o any problems. The heatsink is not really a bother here. I can not guarantee for capacitors, because of the manufacturing tolerances and revisions of the Mobo. Aky: ASUS A8N-E should be fine with Ninja PLUS. I can only assume that some capacitor's could interfere but this depends on the manufacturing tolerance. Cheers, Andy __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#52 (permalink) 01-03-2008, 11:15 AM
Aky Junior Member Join Date: Jan 2008 Posts: 20	Thank you for your answer ! Happy new year to you and all Scythe ! Just something to help if someone else has an A8N-E, I found an image of Ninja Plus RevB on A8N-E motherboard, and it's not totally compatible : http://img525.imageshack.us/img525/5576/cimg1933ab8.jpg Personnally, I will wait the new Ninja Cu and I hope it will be without problem Thank you !

#53 (permalink) 01-03-2008, 01:02 PM
Shinigami Marketing & Support Join Date: Apr 2007 Location: Hamburg Posts: 848	Hi Aky, Thanks for the confirmation. The capacitors problem is some pain with 939,940 and AM sockets. Ninja CU has a different Heatpipe construction, should be better then. Andy __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#54 (permalink) 01-06-2008, 10:37 AM
s_l Junior Member Join Date: Jan 2008 Posts: 3	Hi, Can anyone confirm whether this heatsink is compatitable with the following board:GA-8IPE1000 (rev. 1.x)

#55 (permalink) 01-11-2008, 09:08 PM
Shinigami Marketing & Support Join Date: Apr 2007 Location: Hamburg Posts: 848	Hi S_l, The GA-8IPE1000 seems to be ok but the typical problem are the older type of capacitors which are close to the retention and Ninja PLUS Heatpipes would touch them, so you "might need" to push the capacitors a bit away. Besides this, there seem to be no problems with the Mainboard. __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#56 (permalink) 01-11-2008, 10:48 PM
steglits Junior Member Join Date: Jan 2008 Posts: 2	How about ASUS P5E? How about ASUS P5E? Can Ninja rev B be mounted? Tomas

#57 (permalink) 01-12-2008, 12:37 AM
Shinigami Marketing & Support Join Date: Apr 2007 Location: Hamburg Posts: 848	steglits: ASUS P5E looks pretty good with the design, simple and not crazy Heatpipe-construction. Should be fine with Ninja Plus. __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#58 (permalink) 01-13-2008, 06:59 PM
Stefan Junior Member Join Date: Jan 2008 Posts: 1	Hello! I'm searching desperately for a ultra silent cpu cooler that fits on the MSI K9N Neo V3. Problem is, that the memory banks are VERY close to the cpu socket. Does the Scythe Ninja PLUS Rev. B or the Scythe Mugen fit this Board? Also I would be VERY happy, if you could provide some information about the dimentions of the heatsink & cooler of the Ninja and the Mugen. I don't mean the dimentions over all, but the dimentions at the base of the heatsink. At the MSI K9N Neo V3 I have 15mm from the edge of the cpu-socket to the first memory bank. (From the edge of the black heatsink mounting bracket it's only 3mm to the memory modules. That's damn narrow!) The memory module is 30mm high (if memory is built in). So does ANY of the Scythe cpu heatsinks fit on this constellation? Your help ist very appreciated! Thanks in advance. Stefan
	Last edited by Stefan; 01-13-2008 at 07:17 PM.

#59 (permalink) 01-18-2008, 02:13 PM
chmavr Junior Member Join Date: Jan 2008 Posts: 3	greetings to everyone! i m looking forward to buy a ninja plus for a p4 prescott 3.0Gh and do some overclock on it...my mobo its an MSI 865PE NEO2 flsr series...will fit the ninja???i dont think that i will have a problem but i have to be sure of it! thanks in advance!

#60 (permalink) 01-21-2008, 01:37 PM
Shinigami Marketing & Support Join Date: Apr 2007 Location: Hamburg Posts: 848	Hello, Stefan:: Ninja PLUS and Mugen should be fine with the mentioned Mobo. I can not see any problems. As for dimensions please check the following. http://www.scythe-eu.com/forum/ninja...imensions.html Mugen's first fins start at 36mm measured from the base-plate. So basically the RAM should be OK because the fins are taller. chmavr: MSI 865PE NEO2 flsr should be fine with Ninja PLUS. I can not see any issue here. I can never guarantee but it should be fine __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers