Ninja PLUS Rev. B Compatibility List - Page 22

eagleman · #**211** (**permalink**) 05-15-2009, 07:07 PM

Wollte fragen ob der K�hler auch AM3 Tauglich ist. Da ich mir demn�chst ein AM3 Board kaufe inkl. Quad Prozessor. Werde es sonst probieren wen das niemand weiss.

Oli · #**212** (**permalink**) 05-16-2009, 07:06 PM

Befestigung AM2 = AM3, also von Seiten der Klammer passt ein AM2-K�hler auch auf AM3-Boards.

sumo · #**213** (**permalink**) 05-18-2009, 10:04 AM

Hallo eagleman,

das Klemmkit des AM2 und das des AM3 sind identisch, du kannst also ohne Probleme auf ein AM3 Board umsteigen.

MFG
Chris

Zachary · #**214** (**permalink**) 05-18-2009, 02:32 PM

Hi,

I've got an MSI 790GX-G65 board (AM3) http://global.msi.eu/uploads/prod_bb...d76926be79.jpg

Will the Ninja 2 fit on this board?

Thanks

sumo · #**215** (**permalink**) 05-18-2009, 03:10 PM

Hello zachary,

the Ninja 2 should fit with out any problem on your board.

Cheers,
Chris

rabenus · #**216** (**permalink**) 06-02-2009, 09:56 AM

Hi! My motherboard is Foxconn amd a6vmx Newegg.com - Foxconn A6VMX AM2+/AM2 AMD 690V Micro ATX AMD Motherboard - AMD Motherboards. Will it ninja fit in it? I'm planning to buy one.

eagleman · #**217** (**permalink**) 06-03-2009, 10:12 PM

Der K�hler passt auf ein MSI 790FX-GD70
Und einem Quad 955 BE. Hatte keine Probleme.Bild.jpg

Shinigami · #**218** (**permalink**) 06-04-2009, 09:26 AM

Hi there people =)

rabenus: The mentioned motherboards looks fine, not complicated. You might want to avoid OCZ Reaper or other memory that has such a high memory cooler along with it. Other than that, the Mobo looks like it would work fine with Ninja Rev. b and Ninja 2

eagleman: Danke f�r den Hinweis, werde es umgehend in die Liste aufnehmen =)

Latinman · #**219** (**permalink**) 06-25-2009, 02:27 PM

Hi, What about compatibilty with a Gigabyte GA-MA790GP-DS4H? thanks.

sumo · #**220** (**permalink**) 06-25-2009, 05:02 PM

fits perfect on this board, but now the alltime problem: your memory. If your memory is higher then standard memory the mugen 2 could block one or two slots.

#217 (permalink) 06-03-2009, 10:12 PM
eagleman Junior Member Join Date: Sep 2008 Posts: 9	790fx-gd70 Der K�hler passt auf ein MSI 790FX-GD70 Und einem Quad 955 BE. Hatte keine Probleme.Bild.jpg
	Last edited by eagleman; 06-04-2009 at 09:37 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#211 (permalink) 05-15-2009, 07:07 PM
eagleman Junior Member Join Date: Sep 2008 Posts: 9	Wollte fragen ob der K�hler auch AM3 Tauglich ist. Da ich mir demn�chst ein AM3 Board kaufe inkl. Quad Prozessor. Werde es sonst probieren wen das niemand weiss.

#212 (permalink) 05-16-2009, 07:06 PM
Oli Senior Member Join Date: Aug 2007 Location: Germany, in the middle of Europe Posts: 752	Befestigung AM2 = AM3, also von Seiten der Klammer passt ein AM2-K�hler auch auf AM3-Boards. __________________ C2D E6700@3.33Ghz@1,28V / Mugen 1, Ret Kit & Slip Stream @ 350rpm / summer: idle 35�C - load 70�C / winter: idle 32�C - load 65�C "Benutze Max auf haariges Mammut!" "Use Max on hairy mammoth!"

#213 (permalink) 05-18-2009, 10:04 AM
sumo Product Manager Assistant Join Date: Aug 2008 Location: Hamburg Posts: 553	Hallo eagleman, das Klemmkit des AM2 und das des AM3 sind identisch, du kannst also ohne Probleme auf ein AM3 Board umsteigen. MFG Chris __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#214 (permalink) 05-18-2009, 02:32 PM
Zachary Junior Member Join Date: May 2009 Posts: 2	Hi, I've got an MSI 790GX-G65 board (AM3) http://global.msi.eu/uploads/prod_bb...d76926be79.jpg Will the Ninja 2 fit on this board? Thanks

#215 (permalink) 05-18-2009, 03:10 PM
sumo Product Manager Assistant Join Date: Aug 2008 Location: Hamburg Posts: 553	Hello zachary, the Ninja 2 should fit with out any problem on your board. Cheers, Chris __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#216 (permalink) 06-02-2009, 09:56 AM
rabenus Junior Member Join Date: Jun 2009 Posts: 1	Hi! My motherboard is Foxconn amd a6vmx Newegg.com - Foxconn A6VMX AM2+/AM2 AMD 690V Micro ATX AMD Motherboard - AMD Motherboards. Will it ninja fit in it? I'm planning to buy one.

#218 (permalink) 06-04-2009, 09:26 AM
Shinigami Product Manager Join Date: Apr 2007 Location: Hamburg Posts: 959	Hi there people =) rabenus: The mentioned motherboards looks fine, not complicated. You might want to avoid OCZ Reaper or other memory that has such a high memory cooler along with it. Other than that, the Mobo looks like it would work fine with Ninja Rev. b and Ninja 2 eagleman: Danke f�r den Hinweis, werde es umgehend in die Liste aufnehmen =) __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#219 (permalink) 06-25-2009, 02:27 PM
Latinman Junior Member Join Date: May 2009 Posts: 1	Hi, What about compatibilty with a Gigabyte GA-MA790GP-DS4H? thanks.

#220 (permalink) 06-25-2009, 05:02 PM
sumo Product Manager Assistant Join Date: Aug 2008 Location: Hamburg Posts: 553	fits perfect on this board, but now the alltime problem: your memory. If your memory is higher then standard memory the mugen 2 could block one or two slots. __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!