Ninja PLUS Rev. B Compatibility List - Page 13

Lumix · #**121** (**permalink**) 06-01-2008, 04:57 PM

Hello,

Is Ninja Plus B compatible to the Gigabyte GA-M56S-S3 Board?

hiroshige · #**122** (**permalink**) 06-02-2008, 08:34 AM

Hello Lumix,

I don't have the M56S-S3 here, but i think, the Ninja should fit on this board.
Did you have a look on the exact dimensions of the Ninja? You can find them here:
Ninja PLUS Dimensions and Compatibility

Cheers,
Stefan

Lumix · #**123** (**permalink**) 06-03-2008, 08:53 PM

The Heatpipes touches the Capacitors left near the Socket! Can I still use the Ninja or would a problem or damage follow?

Mgz · #**124** (**permalink**) 06-04-2008, 07:13 AM

I can confirm that the Ninja Plus rev B fit the Gigabyte GA-P35-DS3L, even with four 1 GB OCZ RAM sticks.The fan when it is installed will almost touch the the 2 RAM sticks closest to the CPU socket but it will run fine.

hiroshige · #**125** (**permalink**) 06-04-2008, 08:11 AM

Thx for the information!

Lumix · #**126** (**permalink**) 06-04-2008, 06:27 PM

Ok... the GA-M56S-S3 seems to be compatible. The Capacitors touches the Heatpipes but i think it works... (i hope

)

Ketchup · #**127** (**permalink**) 06-06-2008, 07:35 AM

Asus P5K Pro - Compatible

ps. why ASUS A8R32-MVP is Not Compatible : Ninja PLUS Rev. B Compatibility List

hiroshige · #**128** (**permalink**) 06-06-2008, 10:23 AM

Hello,
thanks for your information regarding the P5K.
The A8R32 is not compatible because of the mosfet-cooler and some of the capacitors.
Cheers,
Stefan

Ketchup · #**129** (**permalink**) 06-06-2008, 01:15 PM

Quote:

Originally Posted by hiroshige

The A8R32 is not compatible because of the mosfet-cooler and some of the capacitors.
Cheers,
Stefan

hmm then why I used Nijna on my old A8R32 Deluxe

?
Look here : Ninja PLUS Rev. B Compatibility List

hiroshige · #**130** (**permalink**) 06-06-2008, 01:20 PM

Ah thanks

#121 (permalink) 06-01-2008, 04:57 PM
Lumix Junior Member Join Date: Jun 2008 Posts: 6	Ga-m56s-s3 Hello, Is Ninja Plus B compatible to the Gigabyte GA-M56S-S3 Board?
	Last edited by Lumix; 06-01-2008 at 05:00 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#122 (permalink) 06-02-2008, 08:34 AM
hiroshige Marketing & Support Join Date: May 2008 Location: Hamburg Posts: 448	Hello Lumix, I don't have the M56S-S3 here, but i think, the Ninja should fit on this board. Did you have a look on the exact dimensions of the Ninja? You can find them here: Ninja PLUS Dimensions and Compatibility Cheers, Stefan __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#123 (permalink) 06-03-2008, 08:53 PM
Lumix Junior Member Join Date: Jun 2008 Posts: 6	The Heatpipes touches the Capacitors left near the Socket! Can I still use the Ninja or would a problem or damage follow?
	Last edited by Lumix; 06-03-2008 at 09:11 PM.

#124 (permalink) 06-04-2008, 07:13 AM
Mgz Junior Member Join Date: Jun 2008 Posts: 1	I can confirm that the Ninja Plus rev B fit the Gigabyte GA-P35-DS3L, even with four 1 GB OCZ RAM sticks.The fan when it is installed will almost touch the the 2 RAM sticks closest to the CPU socket but it will run fine.

#125 (permalink) 06-04-2008, 08:11 AM
hiroshige Marketing & Support Join Date: May 2008 Location: Hamburg Posts: 448	Thx for the information! __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#126 (permalink) 06-04-2008, 06:27 PM
Lumix Junior Member Join Date: Jun 2008 Posts: 6	Ok... the GA-M56S-S3 seems to be compatible. The Capacitors touches the Heatpipes but i think it works... (i hope )

#127 (permalink) 06-06-2008, 07:35 AM
Ketchup Junior Member Join Date: Nov 2007 Location: Poland Posts: 4	Asus P5K Pro - Compatible ps. why ASUS A8R32-MVP is Not Compatible : Ninja PLUS Rev. B Compatibility List

#128 (permalink) 06-06-2008, 10:23 AM
hiroshige Marketing & Support Join Date: May 2008 Location: Hamburg Posts: 448	Hello, thanks for your information regarding the P5K. The A8R32 is not compatible because of the mosfet-cooler and some of the capacitors. Cheers, Stefan __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#130 (permalink) 06-06-2008, 01:20 PM
hiroshige Marketing & Support Join Date: May 2008 Location: Hamburg Posts: 448	Ah thanks __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!