Mugen Compatibility List - Page 8

dragon · #71 (**permalink**) 04-26-2008, 09:02 AM

Anyone know if the Mugen is full compatible with the Gigabyte GA-965P-DQ6 (rev.1.0)motherboard ?

GIGABYTE - Product - Motherboard - Overview - GA-965P-DQ6 (rev. 1.0)

Oli · #72 (**permalink**) 04-26-2008, 09:11 AM

Dragon, on page 1 of this thread there is a list and the Gigabyte seems to be listed in it so please have a look if this helps you.

Bye Oli

dragon · #73 (**permalink**) 04-26-2008, 10:25 AM

@oli,

i see the 1. page and that this motherbord ist compatible.
But, this matherboard com in 3 difrent revision (1.0 -3.0), is this compatibility true for all revision ?
In my motherboard is pretty of cooper and the up and down side, no problem with them ?

Shinigami · #74 (**permalink**) 04-28-2008, 12:07 PM

Hello folks!

Frenzer: Mugen would be fine with this Mobo, but Ninja will not work because of the capacitors. In the past we had no issues with Mugen and socket 478 Mainboards.

Computron: I don't have this Mobo around, sorry. I think it will only fit one way and you have to put the fan on the shorter side. Then it should work with 90% compatibility chance I'd say.

infected: Thanks for your help and posting the images! The list was updated

dragon: The Gigabyte GA-965P-DQ6 should be fine but first version was a bit difficult to be mounted. The fins are slightly touch the cooling construction on that Mainboard if I remember well. Other than that it worked with Mugen with the old layout.

Vog3lm4nn · #75 (**permalink**) 04-30-2008, 02:42 PM

It isnt fully compatible. You lose 2 RAM-Slots if you want to install the cooler heading to the front. So you cant use Dual-Channel

. I had to send the mugen back.

Anachron · #76 (**permalink**) 05-08-2008, 01:31 PM

Hi

Just wondering if the Mugen is compatible with MSI K9A2 Platinum V2?

Thanks.
-Anachron

Shinigami · #77 (**permalink**) 05-13-2008, 01:41 PM

Hello again.

Vog3lm4nn: Sorry, but there is not much I can do, the second slot should be fine though, unless you want to block 4 RAM Slots. With normal RAM is should be fine, right?

Anachron: MSI K9A2 Platinum V2 looks rather safe with the heatsinks around. RAM is a usual AM2 issue, if you plan to use tall ram like Corsair DTX, then Mugen will block first 2 slots. It is really unfortunate, but it is something we have to live with for now.

Outlaw · #78 (**permalink**) 05-18-2008, 09:26 PM

Gigabyte GA-X48-DQ6: compatible

I mounted it with the optional retention kit without spacer and without washers ....

Be aware about high size memory modules !! On normal memory module size there it is no problem ....

There is maybe an other way to mount the fan, if you have problems with high size memory modules. In some cases, you can "move" the fan a little bit away from the modules.

hiroshige · #79 (**permalink**) 05-19-2008, 01:18 PM

Thanks, I just updated the list.

hiroshige · #80 (**permalink**) 05-21-2008, 04:27 PM

Compatibility-List update (+10 Mainboards)

#74 (permalink) 04-28-2008, 12:07 PM
Shinigami Marketing & Support Join Date: Apr 2007 Location: Hamburg Posts: 848	Hello folks! Frenzer: Mugen would be fine with this Mobo, but Ninja will not work because of the capacitors. In the past we had no issues with Mugen and socket 478 Mainboards. Computron: I don't have this Mobo around, sorry. I think it will only fit one way and you have to put the fan on the shorter side. Then it should work with 90% compatibility chance I'd say. infected: Thanks for your help and posting the images! The list was updated dragon: The Gigabyte GA-965P-DQ6 should be fine but first version was a bit difficult to be mounted. The fins are slightly touch the cooling construction on that Mainboard if I remember well. Other than that it worked with Mugen with the old layout. __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers
	Last edited by Shinigami; 04-28-2008 at 12:12 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#71 (permalink) 04-26-2008, 09:02 AM
dragon Junior Member Join Date: Apr 2008 Posts: 2	Anyone know if the Mugen is full compatible with the Gigabyte GA-965P-DQ6 (rev.1.0)motherboard ? GIGABYTE - Product - Motherboard - Overview - GA-965P-DQ6 (rev. 1.0)

#72 (permalink) 04-26-2008, 09:11 AM
Oli Senior Member Join Date: Aug 2007 Location: Germany, in the middle of Europe Posts: 313	Dragon, on page 1 of this thread there is a list and the Gigabyte seems to be listed in it so please have a look if this helps you. Bye Oli __________________ C2D E6700@3Ghz@1,152V / Mugen, Ret Kit & Slip Stream @ 650rpm / summer: idle 37 - load 65 / winter: idle 30 - load 58

#73 (permalink) 04-26-2008, 10:25 AM
dragon Junior Member Join Date: Apr 2008 Posts: 2	@oli, i see the 1. page and that this motherbord ist compatible. But, this matherboard com in 3 difrent revision (1.0 -3.0), is this compatibility true for all revision ? In my motherboard is pretty of cooper and the up and down side, no problem with them ?

#75 (permalink) 04-30-2008, 02:42 PM
Vog3lm4nn Junior Member Join Date: Apr 2008 Posts: 1	Gigabyte MA790FX-DQ6 Rev 1.0 It isnt fully compatible. You lose 2 RAM-Slots if you want to install the cooler heading to the front. So you cant use Dual-Channel . I had to send the mugen back.

#76 (permalink) 05-08-2008, 01:31 PM
Anachron Junior Member Join Date: May 2008 Posts: 1	Hi Just wondering if the Mugen is compatible with MSI K9A2 Platinum V2? Thanks. -Anachron

#77 (permalink) 05-13-2008, 01:41 PM
Shinigami Marketing & Support Join Date: Apr 2007 Location: Hamburg Posts: 848	Hello again. Vog3lm4nn: Sorry, but there is not much I can do, the second slot should be fine though, unless you want to block 4 RAM Slots. With normal RAM is should be fine, right? Anachron: MSI K9A2 Platinum V2 looks rather safe with the heatsinks around. RAM is a usual AM2 issue, if you plan to use tall ram like Corsair DTX, then Mugen will block first 2 slots. It is really unfortunate, but it is something we have to live with for now. __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#78 (permalink) 05-18-2008, 09:26 PM
Outlaw Junior Member Join Date: May 2008 Posts: 2	Gigabyte GA-X48-DQ6: compatible I mounted it with the optional retention kit without spacer and without washers .... Be aware about high size memory modules !! On normal memory module size there it is no problem .... There is maybe an other way to mount the fan, if you have problems with high size memory modules. In some cases, you can "move" the fan a little bit away from the modules.
	Last edited by Outlaw; 05-23-2008 at 09:10 PM. Reason: Added infos

#79 (permalink) 05-19-2008, 01:18 PM
hiroshige Scythe Support Join Date: May 2008 Location: Hamburg Posts: 267	Thanks, I just updated the list. __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#80 (permalink) 05-21-2008, 04:27 PM
hiroshige Scythe Support Join Date: May 2008 Location: Hamburg Posts: 267	Compatibility-List update (+10 Mainboards) __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!