Mugen Compatibility List - Page 3

Shinigami · #21 (**permalink**) 12-12-2007, 06:10 PM

Hi,

@Inf3rn4l: Ich sehe da keine Probleme und mir sind auch keine bekannt. Layout sieht eigentlich ganz normal und nicht sonderlich "verr�ckt" aus. Von daher w�rde ich sagen, dass die Kombination kompatibel ist.

@PetitBreakfast: The Kit does not really have any restrictions, only if there is already a backplate. Scythe Universal Retention Kit complies the standard from Intel, which has to be followed by everyone else, it uses the standard mounting holes.
As far as I remember, there is no backplate on the Gigabyte P35-DS3, so it should be fine.

Greetings

Aky · #22 (**permalink**) 01-01-2008, 08:44 PM

Hello !

Is the Scythe Mugen compatible with Asus A8N-E motherboard (socket 939) ?

Thank you

Shinigami · #23 (**permalink**) 01-03-2008, 11:38 AM

Hi,

Aky, Asus A8N-E should be fine with Mugen, I don't see any issues here.

Greetings

ploost · #24 (**permalink**) 01-06-2008, 02:58 PM

msi p35 neo, passt ohne probleme, l�fter verdeckt allerdings bei mir ersten ram slot. (ka ob man den h�her anbringen kann noch, mir wars egal hab slot 2+4 benutzt)

Swizz · #25 (**permalink**) 01-09-2008, 04:13 PM

Instaled on MSI K9AGM3-FD/-F Fits fine in my MoBo

Shinigami · #26 (**permalink**) 01-11-2008, 09:20 PM

Ploost and Swizz:
Thank you guys for your support. We appreciate that and have updated the list.

Cheers,
Andy

colum · #27 (**permalink**) 01-12-2008, 09:29 AM

Hi,

I bought Mugen yesterday, and as I've searched through this forum, my mobo was incompatible because of the non-standard retention. It was written Biostar TA690G AM2 (Original AM2 retention is non-standard).

So I've ordered my cooler with Thermalright retention kit which cost me 10$. I've received my package, opened it. Before installing new retention kit I've tried Mugen if it's really incompatible. But I heard the clips sound and it was well fit on the mobo's original retention. So I didn't need to install the retention kit I bought as an extra...

For your information...

PS: I can send photos if they're needed.

K.M.Bak · #28 (**permalink**) 01-23-2008, 09:49 AM

Hello!
What about Asus P5K Pro? I have ******** (but it is the same like Mugen?) and want to buy P5K Pro.

Anyone tested?
Quite high heatsinks...
IN4.pl - Serwis informacyjny :: ASUS P5K PRO z 8-mio fazowym zasilaniem

Waiting for replies...

luluthemonkey · #29 (**permalink**) 01-24-2008, 05:48 AM

Hi,
der ******** passt bei mir gut auf das Abit AB9 Quad GT, nur w�rde ich zur Sicherheit lieber das Retentions Kit von Scythe verbauen damit der K�hler Bomebnfest sitzt.

Nur geht das auch? hat das jemand getestet? Danke

19AvdP79 · #30 (**permalink**) 01-24-2008, 10:43 AM

I can confirm that the Scythe Mugen is fitting on an Gigabyte GA-X38-DQ6 Motherboard.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#21 (permalink) 12-12-2007, 06:10 PM
Shinigami Marketing Join Date: Apr 2007 Location: Hamburg Posts: 851	Hi, @Inf3rn4l: Ich sehe da keine Probleme und mir sind auch keine bekannt. Layout sieht eigentlich ganz normal und nicht sonderlich "verr�ckt" aus. Von daher w�rde ich sagen, dass die Kombination kompatibel ist. @PetitBreakfast: The Kit does not really have any restrictions, only if there is already a backplate. Scythe Universal Retention Kit complies the standard from Intel, which has to be followed by everyone else, it uses the standard mounting holes. As far as I remember, there is no backplate on the Gigabyte P35-DS3, so it should be fine. Greetings __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#22 (permalink) 01-01-2008, 08:44 PM
Aky Junior Member Join Date: Jan 2008 Posts: 20	Hello ! Is the Scythe Mugen compatible with Asus A8N-E motherboard (socket 939) ? Thank you

#23 (permalink) 01-03-2008, 11:38 AM
Shinigami Marketing Join Date: Apr 2007 Location: Hamburg Posts: 851	Hi, Aky, Asus A8N-E should be fine with Mugen, I don't see any issues here. Greetings __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#24 (permalink) 01-06-2008, 02:58 PM
ploost Junior Member Join Date: Nov 2007 Posts: 29	msi p35 neo, passt ohne probleme, l�fter verdeckt allerdings bei mir ersten ram slot. (ka ob man den h�her anbringen kann noch, mir wars egal hab slot 2+4 benutzt)

#25 (permalink) 01-09-2008, 04:13 PM
Swizz Junior Member Join Date: Jan 2008 Posts: 1	Instaled on MSI K9AGM3-FD/-F Fits fine in my MoBo

#26 (permalink) 01-11-2008, 09:20 PM
Shinigami Marketing Join Date: Apr 2007 Location: Hamburg Posts: 851	Ploost and Swizz: Thank you guys for your support. We appreciate that and have updated the list. Cheers, Andy __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#27 (permalink) 01-12-2008, 09:29 AM
colum Junior Member Join Date: Jan 2008 Posts: 3	Biostar TA690G AM2 is ok!!! Hi, I bought Mugen yesterday, and as I've searched through this forum, my mobo was incompatible because of the non-standard retention. It was written Biostar TA690G AM2 (Original AM2 retention is non-standard). So I've ordered my cooler with Thermalright retention kit which cost me 10$. I've received my package, opened it. Before installing new retention kit I've tried Mugen if it's really incompatible. But I heard the clips sound and it was well fit on the mobo's original retention. So I didn't need to install the retention kit I bought as an extra... For your information... PS: I can send photos if they're needed.

#28 (permalink) 01-23-2008, 09:49 AM
K.M.Bak Junior Member Join Date: Jan 2008 Posts: 6	Hello! What about Asus P5K Pro? I have ******** (but it is the same like Mugen?) and want to buy P5K Pro. Anyone tested? Quite high heatsinks... IN4.pl - Serwis informacyjny :: ASUS P5K PRO z 8-mio fazowym zasilaniem Waiting for replies...

#29 (permalink) 01-24-2008, 05:48 AM
luluthemonkey Junior Member Join Date: Sep 2007 Posts: 7	Hi, der ******** passt bei mir gut auf das Abit AB9 Quad GT, nur w�rde ich zur Sicherheit lieber das Retentions Kit von Scythe verbauen damit der K�hler Bomebnfest sitzt. Nur geht das auch? hat das jemand getestet? Danke

#30 (permalink) 01-24-2008, 10:43 AM
19AvdP79 Junior Member Join Date: Jan 2008 Posts: 1	I can confirm that the Scythe Mugen is fitting on an Gigabyte GA-X38-DQ6 Motherboard.