Motherboard Compatibility List - Page 7

sraka · #61 (**permalink**) 09-04-2007, 01:56 PM

Greetings,

I have a couple of questions connected with Scythe Andy Samurai Master and Scythe ********.

-> Andy is compatible with Asus M2A-VM HDMI, does it mean that with no hdmi version of this motherboard too, right? And is it possible to mount it in both modes: with heatpipes on left and right?

-> There are few MOBOs from Gigabyte already but mainly for LGA775 on list for Andy Samurai... but what about two models for AM2: Gigabyte GA-MA69G-S2H and S3H? I've found (from pictures) that those models have higher capacitors installed near AM2 socket than in ASUS M2A-VM.. does it mean I won't be able to install ASMaster with heat-pipes on the left side (mosfets)? And what if I'll install Andy on opposite side (ram) - I'll block two ram banks that way and forced to move them into other two and forget about future upgrade?

-> the same questions are connected with ******** if there will be no way to place Andy on those Gigabytes

.

Thnx for all help and sorry for crap English.

Drachton · #62 (**permalink**) 09-08-2007, 08:04 PM

Ok last update for Gigabyte P35-DS3[R]
Mugen is mounted with his blower to the bottom. Ok thats not 100% perfect but, the temperatures are also very good. You cant position the mugen in an other position, because you cant use ram slot 1, and you need it. If you want Dualchannel you have to put a RAM in Slot 1

Now its even tight between Mugen and the RAM in Slot 1 but it fits

Greets from Germany
Drachton

Ah i forget a picture. You'll see here Mushkin HP2 in Slot 3 and 4, thats an old picture. Now they are in Slot 1+3, it works.
Directupload.net - b75PvhoR.jpg
So i would say Gigabyte P35-DS3[R] is yellow for Mugen, in fact of the position blower to the bottom

Bobsama · #63 (**permalink**) 09-16-2007, 03:40 AM

Abit IP35-E--will it work?

busante · #64 (**permalink**) 09-16-2007, 03:42 PM

Quote:

Originally Posted by Drachton

So i would say Gigabyte P35-DS3[R] is yellow for Mugen, in fact of the position blower to the bottom

Well, why don't you turn around the Mugen 90 degrees?
Then you'll have more room for the fan and the hot air from the Mugen gets blown out directly without heating up the power source.
I have a DS3R too and it fits nicely... no RAM issues.

Bobsama · #65 (**permalink**) 09-19-2007, 12:21 AM

The ******** fits on standard a standard Abit IP35-E (version 1.0). Success!

Shinigami · #66 (**permalink**) 09-19-2007, 12:12 PM

Hi everyone.

Time to respond to your questions.

RealSucker: S�ren, thanks for posting the pics. That kinda shows that there is no way to mount. I ordered a couple samples from Gigabyte, hope they can support me with these so I can test the compatibility.

sraka: Asus M2A-VM HDMI and Andy Samurai Master and ******** would work, but only 2 ways, bent Heatpipes facing RAM or the ATX connectors(PS/2,USB..). There are no other options for socket AM2, sorry.

Gigabyte GA-MA69G-S2H and S3H is same as above. It should be compatible, I don't see any issues. Andy Samurai Master would most likely fit both directions, but worst case you can face pipes to RAM. You should not really block 2 RAMs, maximum one, but if you put the RAM inside, I think it won't even get in touch with the Andy Samurai Master.
PS: Your English is fine with me, no need to be sorry.

Drachton: I updated the list but still as far as I know this is no problem, the RAM won't touch the Mugen cooler, even you use the slot 1, the cooler is way taller than the RAM. So mount memory first and then the cooler...Thanks for the info tough! I added some text to the compatibility.

Bobsama: Thanks for confirming the compatibility. I thought it would be compatible, but confirmed info is way better. Thanks!

busante: I mentioned it in the reply, there should be no problem with mounting it other ways. Thanks for the confirmation and the support.

Greetings,
Andy

GroundV7 · #67 (**permalink**) 09-19-2007, 10:06 PM

Hi,

Is the Scythe Andy Samuray compatible with Asus P5K-E and MSI P35 Platinum?

Thanks.

nissep · #68 (**permalink**) 10-16-2007, 11:52 AM

Hi all,

Will a Scythe Mine Rev. or a Scythe Ninja PLUS Rev. B work with a Asus P5KC motherboard?

NP

Shinigami · #69 (**permalink**) 10-16-2007, 12:49 PM

Hello everyone.

GroundV7: The MSI P35 Platinum should be not compatible to Andy Samurai Master. Asus P5K-E looks already better. Did not test, but looks safe.

nissep: Asus P5KC should be compatible to Mine and Ninja PLUS. The whole design of the Mobo looks safe and I don't see any compatibility issues.

Greets,
Andy

TEK · #70 (**permalink**) 11-05-2007, 09:01 AM

Can you tell if the Ninja Mini CPU Cooler is compatible with GA-P35-DS4, rev 1.1?

I will need all RAM slots, and ideally the fan should be mounted on the RAM slots side.

Regads, TEK

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#61 (permalink) 09-04-2007, 01:56 PM
sraka Junior Member Join Date: Sep 2007 Posts: 2	Greetings, I have a couple of questions connected with Scythe Andy Samurai Master and Scythe ******. -> Andy is compatible with Asus M2A-VM HDMI, does it mean that with no hdmi version of this motherboard too, right? And is it possible to mount it in both modes: with heatpipes on left and right? -> There are few MOBOs from Gigabyte already but mainly for LGA775 on list for Andy Samurai... but what about two models for AM2: Gigabyte GA-MA69G-S2H and S3H? I've found (from pictures) that those models have higher capacitors installed near AM2 socket than in ASUS M2A-VM.. does it mean I won't be able to install ASMaster with heat-pipes on the left side (mosfets)? And what if I'll install Andy on opposite side (ram) - I'll block two ram banks that way and forced to move them into other two and forget about future upgrade? -> the same questions are connected with ****** if there will be no way to place Andy on those Gigabytes . Thnx for all help and sorry for crap English.

#62 (permalink) 09-08-2007, 08:04 PM
Drachton Junior Member Join Date: Aug 2007 Posts: 4	Ok last update for Gigabyte P35-DS3[R] Mugen is mounted with his blower to the bottom. Ok thats not 100% perfect but, the temperatures are also very good. You cant position the mugen in an other position, because you cant use ram slot 1, and you need it. If you want Dualchannel you have to put a RAM in Slot 1 Now its even tight between Mugen and the RAM in Slot 1 but it fits Greets from Germany Drachton Ah i forget a picture. You'll see here Mushkin HP2 in Slot 3 and 4, thats an old picture. Now they are in Slot 1+3, it works. Directupload.net - b75PvhoR.jpg So i would say Gigabyte P35-DS3[R] is yellow for Mugen, in fact of the position blower to the bottom
	Last edited by Drachton; 09-08-2007 at 08:12 PM.

#63 (permalink) 09-16-2007, 03:40 AM
Bobsama Junior Member Join Date: Sep 2007 Posts: 6	Abit IP35-E--will it work? __________________ Intel Pentium Dual-Core E2140 Abit IP35-E Scythe ******** Thermaltake Purepower 500W (no RAM, graphics card, case, hard drive, optical drive, OS, or others)

#65 (permalink) 09-19-2007, 12:21 AM
Bobsama Junior Member Join Date: Sep 2007 Posts: 6	The ****** fits on standard a standard Abit IP35-E (version 1.0). Success! __________________ Intel Pentium Dual-Core E2140 Abit IP35-E Scythe ****** Thermaltake Purepower 500W (no RAM, graphics card, case, hard drive, optical drive, OS, or others)

#66 (permalink) 09-19-2007, 12:12 PM
Shinigami Marketing Join Date: Apr 2007 Location: Hamburg Posts: 855	Hi everyone. Time to respond to your questions. RealSucker: S�ren, thanks for posting the pics. That kinda shows that there is no way to mount. I ordered a couple samples from Gigabyte, hope they can support me with these so I can test the compatibility. sraka: Asus M2A-VM HDMI and Andy Samurai Master and ****** would work, but only 2 ways, bent Heatpipes facing RAM or the ATX connectors(PS/2,USB..). There are no other options for socket AM2, sorry. Gigabyte GA-MA69G-S2H and S3H is same as above. It should be compatible, I don't see any issues. Andy Samurai Master would most likely fit both directions, but worst case you can face pipes to RAM. You should not really block 2 RAMs, maximum one, but if you put the RAM inside, I think it won't even get in touch with the Andy Samurai Master. PS: Your English is fine with me, no need to be sorry. Drachton: I updated the list but still as far as I know this is no problem, the RAM won't touch the Mugen cooler, even you use the slot 1, the cooler is way taller than the RAM. So mount memory first and then the cooler...Thanks for the info tough! I added some text to the compatibility. Bobsama: Thanks for confirming the compatibility. I thought it would be compatible, but confirmed info is way better. Thanks! busante:** I mentioned it in the reply, there should be no problem with mounting it other ways. Thanks for the confirmation and the support. Greetings, Andy __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#67 (permalink) 09-19-2007, 10:06 PM
GroundV7 Junior Member Join Date: Sep 2007 Posts: 1	Hi, Is the Scythe Andy Samuray compatible with Asus P5K-E and MSI P35 Platinum? Thanks.

#68 (permalink) 10-16-2007, 11:52 AM
nissep Junior Member Join Date: Oct 2007 Posts: 1	Hi all, Will a Scythe Mine Rev. or a Scythe Ninja PLUS Rev. B work with a Asus P5KC motherboard? NP

#69 (permalink) 10-16-2007, 12:49 PM
Shinigami Marketing Join Date: Apr 2007 Location: Hamburg Posts: 855	Hello everyone. GroundV7: The MSI P35 Platinum should be not compatible to Andy Samurai Master. Asus P5K-E looks already better. Did not test, but looks safe. nissep: Asus P5KC should be compatible to Mine and Ninja PLUS. The whole design of the Mobo looks safe and I don't see any compatibility issues. Greets, Andy __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#70 (permalink) 11-05-2007, 09:01 AM
TEK Junior Member Join Date: Nov 2007 Posts: 3	Can you tell if the Ninja Mini CPU Cooler is compatible with GA-P35-DS4, rev 1.1? I will need all RAM slots, and ideally the fan should be mounted on the RAM slots side. Regads, TEK