Motherboard Compatibility List

[hiroshige]

Hello Mjolnir,

because of the strange heatpipe, it's really difficult to tell. What I know for sure is, that Andy Samurai Master fits on this board.

Cheers,
Stefan - Scythe EU Hamburg

[nobsy1984]

Moin Moin,
passt der Orochi auf mein Evga 790i Ultra SLi (132-CK-NF79-TR).

EVGA | Products

mfg norbert

[hiroshige]

Hallo Norbert,

soweit ich das von Fotos her beurteilen kann passt der Orochi - bitte finde aber vorher heraus, ob der Orochi in dein Gehäuse passt!

Viele Grüße,
Stefan - Scythe EU Hamburg

[nobsy1984]

Habe nen Stacker 830 das soll passen.
Habe den Kühler jetzt bestellt. Gebe Rückmeldung falls es irgendwelche komplikationen gibt.

mfg

[d4v1d]

Hello !

I would like to know if any of this mainboards are compatible with Ninja2

1) Gigabyte GA-EP45-DS3L DES
2) Gigabyte GA-EP45-DS3LR DES
3) MSI Neo3-FR
4) Asus P5Q Pro

Greetings for all

[TomJones]

Hi,

Anybody saying that Dell is always out off standards?
No - at least not in my case.


The NINJA 2 cooler is fully compatible with a Dell Dimension 2350 PC.

1. It fits very sharp in volume, especially in height
2. The Intel 478 socket mounting fits to the Dell motherboard interface.
   You only break your fingers to press the clips and you need to remove your CD/DVD drives to access with your hand the rear clip
3. The fan connector fits to the motherboard connector and works perfect.
4. So you can remove the very noisy Dell CPU fan with out any problems.

By the way, years before I tried to install a low noise fan in a Dell OptiPlex GX1: Mission Impossible !!!

Not sure whether I need the SlipStream fan (20,5dB@89m³/h) at all? The DELL BIOS (A02) does not allow to read CPU temperatures (DELL), so I am hesitant to apply passive cooling. May be I'll try a Papst Lüfter 4412 F/2GLLL (14,0dB@60m³/h) for futher noise reduction ...

[hiroshige]

@d4vid: Ninja 2 should work with all of those Boards.

@TomJones: Thanks for the info!

[random]

ist es ohne probleme möglich einen Scythe Mugen 2 auf ein Asus Rampage II GENE zu bauen?

danke im vorraus für eine schnelle antwort (;

[hiroshige]

Hallo random,

Mugen 2 passt auf das Rampage II Gene, hardware4u.net verbaut z.B. genau diese Kombination in seinem Gamers Dream Rev. 3.1 Air Micro.

Viele Grüße,
Stefan - Scythe EU Hamburg

[tza]

Will the Mugen 2 fit the Asus P5N-D with attached Northbridge fan? Thanxs.