Zipang and DFI Lanparty DK P35

kyo · #1 (**permalink**) 01-28-2008, 03:49 PM

Compatible ?

Thx!

Shinigami · #2 (**permalink**) 02-04-2008, 04:29 PM

Hi,

Yeah should be fine as well.

ciukacz · #3 (**permalink**) 04-24-2008, 09:24 PM

excuse me if i'm being rude, but i don't want to depend on "should" when spending 80$. has anyone tried and mounted zipang on that mobo ?
did it fit in all directions ? perhaps 1st memory slot was blocked when heatpipes were aligned horizontally ?

tia and regards

Shinigami · #4 (**permalink**) 04-28-2008, 01:00 PM

Hi,

Well, I don't want to be rude neither but I can tell you that it is basically impossible to have all the mainboards made in last 10 years in all versions. DFI is rather difficult to get and not the most common/demanded Mainboard to start with. I did not have the board here, but based on my past experience I don't see any issues. The northbridge Heatsink is not that tall and Zipang is taller than Corsair Dominator RAM, so it depends on which memory you will use etc.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#1 (permalink) 01-28-2008, 03:49 PM
kyo Junior Member Join Date: Jan 2008 Posts: 2	Zipang and DFI Lanparty DK P35 Compatible ? Thx!

#2 (permalink) 02-04-2008, 04:29 PM
Shinigami Marketing & Support Join Date: Apr 2007 Location: Hamburg Posts: 848	Hi, Yeah should be fine as well. __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#3 (permalink) 04-24-2008, 09:24 PM
ciukacz Junior Member Join Date: Apr 2008 Posts: 1	excuse me if i'm being rude, but i don't want to depend on "should" when spending 80$. has anyone tried and mounted zipang on that mobo ? did it fit in all directions ? perhaps 1st memory slot was blocked when heatpipes were aligned horizontally ? tia and regards
	Last edited by ciukacz; 04-25-2008 at 12:18 PM. Reason: edited price

#4 (permalink) 04-28-2008, 01:00 PM
Shinigami Marketing & Support Join Date: Apr 2007 Location: Hamburg Posts: 848	Hi, Well, I don't want to be rude neither but I can tell you that it is basically impossible to have all the mainboards made in last 10 years in all versions. DFI is rather difficult to get and not the most common/demanded Mainboard to start with. I did not have the board here, but based on my past experience I don't see any issues. The northbridge Heatsink is not that tall and Zipang is taller than Corsair Dominator RAM, so it depends on which memory you will use etc. __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers