Ninja CU & Ninja Mini Compatibility - Page 4

zbo · #31 (**permalink**) 04-30-2008, 12:42 AM

The Ninja CU fits a Asus P5P800 perfectly. With the fan installed it goes over the first ram slot. With normal RAM its no problem but with double height RAM I can see it being an issue.

Shinigami · #32 (**permalink**) 04-30-2008, 01:40 PM

Paranoia: Kannst du mal sagen welches Mainboard du da verwendet hast?

zbo: Thanks for confirming! I have added the Mobo to the list.

Oli · #33 (**permalink**) 04-30-2008, 01:57 PM

Einige Beitr�ge weiter oben schrieb er: Asus P5N32-E sli plus

Ciao Oli

pallkars · #34 (**permalink**) 04-30-2008, 11:03 PM

Does it work on a Gigabyte GA-MA78GM-S2H 780G mATX?
and i have 4*1GB corsair xms2 DHX. I really hope it will fit in lol

Shinigami · #35 (**permalink**) 05-02-2008, 11:05 AM

Hey,

Paranoia und Oli: Danke!! Hab ich �bersehen.

pallkars: Gigabyte GA-MA78GM-S2H should be compatible, only the RAM needs to be not too tall, so no Corsair Dominator or OCZ ram with super tall RAM.

pallkars · #36 (**permalink**) 05-12-2008, 04:04 PM

Just one off topic question: Can you use these RAMs together?
http://www.corsair.com/_datasheets/T...-6400C4DHX.pdf
http://www.corsair.com/_datasheets/T...048-6400C4.pdf

Shinigami · #37 (**permalink**) 05-13-2008, 01:06 PM

pallkars: I am not sue what you want to know here. If you want to use these both in Dual Channel, Slot1 DHX and Slot 2 XMS2, then it should work but the speed and timings will be adjusted to those of the slower RAM kit. If you put 2 Kits in total 4 Slots, then it will be as well adjusted, but less trouble in this case. Please bring to mind, that I am not from Corsair, might be some issues there that I don't know about. =P

pallkars · #38 (**permalink**) 05-17-2008, 01:47 PM

Thanks anyway :P

hiroshige · #39 (**permalink**) 05-21-2008, 04:58 PM

Added 6 Mainboards.

Zepth · #40 (**permalink**) 05-25-2008, 08:21 PM

The Ninja Cu fits just fine on my Asus P5E motherboard. And it's keeping my 4Ghz Core2Duo below 60*C nearly silent too. Great product, couldn't be happier with it. Pictures to follow.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#31 (permalink) 04-30-2008, 12:42 AM
zbo Junior Member Join Date: Apr 2008 Posts: 2	The Ninja CU fits a Asus P5P800 perfectly. With the fan installed it goes over the first ram slot. With normal RAM its no problem but with double height RAM I can see it being an issue.

#32 (permalink) 04-30-2008, 01:40 PM
Shinigami Marketing & Support Join Date: Apr 2007 Location: Hamburg Posts: 848	Paranoia: Kannst du mal sagen welches Mainboard du da verwendet hast? zbo: Thanks for confirming! I have added the Mobo to the list. __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#33 (permalink) 04-30-2008, 01:57 PM
Oli Senior Member Join Date: Aug 2007 Location: Germany, in the middle of Europe Posts: 375	Einige Beitr�ge weiter oben schrieb er: Asus P5N32-E sli plus Ciao Oli __________________ C2D E6700@3Ghz@1,152V / Mugen, Ret Kit & Slip Stream @ 650rpm / summer: idle 37 - load 65 / winter: idle 30 - load 58

#34 (permalink) 04-30-2008, 11:03 PM
pallkars Junior Member Join Date: Apr 2008 Posts: 3	Does it work on a Gigabyte GA-MA78GM-S2H 780G mATX? and i have 4*1GB corsair xms2 DHX. I really hope it will fit in lol

#35 (permalink) 05-02-2008, 11:05 AM
Shinigami Marketing & Support Join Date: Apr 2007 Location: Hamburg Posts: 848	Hey, Paranoia und Oli: Danke!! Hab ich �bersehen. pallkars: Gigabyte GA-MA78GM-S2H should be compatible, only the RAM needs to be not too tall, so no Corsair Dominator or OCZ ram with super tall RAM. __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#36 (permalink) 05-12-2008, 04:04 PM
pallkars Junior Member Join Date: Apr 2008 Posts: 3	Just one off topic question: Can you use these RAMs together? http://www.corsair.com/_datasheets/T...-6400C4DHX.pdf http://www.corsair.com/_datasheets/T...048-6400C4.pdf

#37 (permalink) 05-13-2008, 01:06 PM
Shinigami Marketing & Support Join Date: Apr 2007 Location: Hamburg Posts: 848	pallkars: I am not sue what you want to know here. If you want to use these both in Dual Channel, Slot1 DHX and Slot 2 XMS2, then it should work but the speed and timings will be adjusted to those of the slower RAM kit. If you put 2 Kits in total 4 Slots, then it will be as well adjusted, but less trouble in this case. Please bring to mind, that I am not from Corsair, might be some issues there that I don't know about. =P __________________ * Register and enjoy the official Scythe Forum * Compatibility List for Scythe CPU Coolers

#38 (permalink) 05-17-2008, 01:47 PM
pallkars Junior Member Join Date: Apr 2008 Posts: 3	Thanks anyway :P

#39 (permalink) 05-21-2008, 04:58 PM
hiroshige Marketing & Support Join Date: May 2008 Location: Hamburg Posts: 396	Added 6 Mainboards. __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#40 (permalink) 05-25-2008, 08:21 PM
Zepth Junior Member Join Date: May 2008 Posts: 2	The Ninja Cu fits just fine on my Asus P5E motherboard. And it's keeping my 4Ghz Core2Duo below 60*C nearly silent too. Great product, couldn't be happier with it. Pictures to follow.