SimplyCool

 


Go Back   Official Scythe Forum > Scythe CPU Coolers > Kama Angle

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 08-24-2010, 03:05 PM
EvoBeardy's Avatar
Junior Member
 
Join Date: May 2009
Posts: 5
Default Replacement Fan/s For Kama Angle Rev.B:

I currently have the Kama Angle Rev.B in my system, and after upgrading my Musashi with two Scythe Kaze Jyu's (58CFM), I wanna replace the stock 1200rpm PWM Slipstream with something more powerful (but not too loud), and possibly a Push/Pull setup for overclocking my quad-unlocked Phenom II 545 and the future replacement CPU/Rig.

In my new Storm Scout, I currently get 23c Idle and 34c running Vantage, which are very respectable temps considering it has a GTS250 underneath it.

I was considering replacing the 1200rpm Slipstream witha single 1600rpm Slipstream, or possible push/pull exhaust side or both top and rear.
I was also considering 1850 Gentle Typhoon's, or 2000rpm Ultra Kaze's, but due to the nature of this cooler, I'm unsure how the Static Pressure/CFM is more effective, so hoped to get some advice here regarding it.

Any help would be greatly appreciated, thanks in advance.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Template-Modifications by TMS
Copyrights by Scythe EU GmbH - All rights reserved - 2007

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50