News about the new Scythe NINJA VGA cooler

tonschk · #1 (**permalink**) 04-10-2009, 10:09 PM

Hello , I have a suggestion about the new NINJA VGA cooler , I think is better to leave about 4mm between the fins to allow the possibility to use this VGA cooler fanless , if the fins are very close together ( only 2mm separation ) is not possible to use fanless , thank you

tonschk · #2 (**permalink**) 04-14-2009, 02:55 AM

Any news about the NINJA VGA cooler ?

hiroshige · #3 (**permalink**) 04-14-2009, 10:12 AM

Hello tonschk,

Ninja VGA Cooler was a handmade prototype sample on CeBIT so there are no specs or compatibilites known at the moment.

Why do you think that it is not possible to use the cooler fanless when there is only 2 mm space between the fins?

Cheers,
Stefan - Scythe EU Hamburg

tonschk · #4 (**permalink**) 04-14-2009, 01:29 PM

I think the Accelero S1 rev2 is Fantastic ,note the distance between the fins of this VGA cooler , I have this accelero S1 rev2 attached Fanless to my video card 8800GT ( room temp 28c ) , this VGA cooler Fanless is able to keep my 8800GT idle at 36-38c ( with good airflow inside the case )

I will buy immediately the new Ninja VGA cooler if this new cooler have have six heatpipes but please keep enought distance between the fins

hiroshige · #5 (**permalink**) 04-14-2009, 02:14 PM

Hello tonschk,

thanks again for your feedback, actually I don't know how far the development process of Ninja VGA is, so I can't tell you if we are able to test or if it was already tested how the fin-distance has an influence in the temperature. I'm really sure that our engineers worked with different distances and tested, but I will forward these info to them!

Cheers,
Stefan - Scythe EU Hamburg

ccdpr0 · #6 (**permalink**) 06-14-2009, 03:06 PM

hello,

when sale start for this beauty?

asap please.

running since years ncu2005 with perfect temps, but my grafic cards wants some cold air to

thx

sumo · #7 (**permalink**) 06-15-2009, 12:22 PM

Hi,

it's too early to say a fixed date, but maybe it will come on 2009.

Cheers Chris

Aouch · #8 (**permalink**) 06-19-2009, 05:55 PM

Is the Ninja VGA-Cooler still being worked on?

If yes, the result will be 3 Scythe VGA-Cooler, the Musashi, the Setsugen and the Ninja.

sumo · #9 (**permalink**) 06-22-2009, 01:16 PM

Yes, of course.

The result will be 4 coolers: Musashi, "Big Musashi", Setsugen, "Ninja Fanless".

Cheers Chris

bezgo · #10 (**permalink**) 07-01-2009, 12:22 PM

Hello,

does scythe plan to make a dualcore vga cooler? I mean like accelero xtreme 4870x2?
Thank you!

BR, bezgo

#1 (permalink) 04-10-2009, 10:09 PM
tonschk Member Join Date: Mar 2008 Location: London UK Posts: 59	News about the new Scythe NINJA VGA cooler Hello , I have a suggestion about the new NINJA VGA cooler , I think is better to leave about 4mm between the fins to allow the possibility to use this VGA cooler fanless , if the fins are very close together ( only 2mm separation ) is not possible to use fanless , thank you
	Last edited by tonschk; 04-14-2009 at 02:57 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#2 (permalink) 04-14-2009, 02:55 AM
tonschk Member Join Date: Mar 2008 Location: London UK Posts: 59	Any news about the NINJA VGA cooler ?

#3 (permalink) 04-14-2009, 10:12 AM
hiroshige Marketing/Service Coordinator Join Date: May 2008 Location: Hamburg Posts: 988	Hello tonschk, Ninja VGA Cooler was a handmade prototype sample on CeBIT so there are no specs or compatibilites known at the moment. Why do you think that it is not possible to use the cooler fanless when there is only 2 mm space between the fins? Cheers, Stefan - Scythe EU Hamburg __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#4 (permalink) 04-14-2009, 01:29 PM
tonschk Member Join Date: Mar 2008 Location: London UK Posts: 59	I think the Accelero S1 rev2 is Fantastic ,note the distance between the fins of this VGA cooler , I have this accelero S1 rev2 attached Fanless to my video card 8800GT ( room temp 28c ) , this VGA cooler Fanless is able to keep my 8800GT idle at 36-38c ( with good airflow inside the case ) I will buy immediately the new Ninja VGA cooler if this new cooler have have six heatpipes but please keep enought distance between the fins
	Last edited by tonschk; 04-14-2009 at 01:39 PM..

#5 (permalink) 04-14-2009, 02:14 PM
hiroshige Marketing/Service Coordinator Join Date: May 2008 Location: Hamburg Posts: 988	Hello tonschk, thanks again for your feedback, actually I don't know how far the development process of Ninja VGA is, so I can't tell you if we are able to test or if it was already tested how the fin-distance has an influence in the temperature. I'm really sure that our engineers worked with different distances and tested, but I will forward these info to them! Cheers, Stefan - Scythe EU Hamburg __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#6 (permalink) 06-14-2009, 03:06 PM
ccdpr0 Junior Member Join Date: Jun 2009 Posts: 1	hello, when sale start for this beauty? asap please. running since years ncu2005 with perfect temps, but my grafic cards wants some cold air to thx

#7 (permalink) 06-15-2009, 12:22 PM
sumo Product Manager Assistant Join Date: Aug 2008 Location: Hamburg Posts: 553	Hi, it's too early to say a fixed date, but maybe it will come on 2009. Cheers Chris __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#8 (permalink) 06-19-2009, 05:55 PM
Aouch Junior Member Join Date: May 2009 Posts: 12	Is the Ninja VGA-Cooler still being worked on? If yes, the result will be 3 Scythe VGA-Cooler, the Musashi, the Setsugen and the Ninja.

#9 (permalink) 06-22-2009, 01:16 PM
sumo Product Manager Assistant Join Date: Aug 2008 Location: Hamburg Posts: 553	Yes, of course. The result will be 4 coolers: Musashi, "Big Musashi", Setsugen, "Ninja Fanless". Cheers Chris __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!

#10 (permalink) 07-01-2009, 12:22 PM
bezgo Junior Member Join Date: Apr 2009 Posts: 4	x2 Hello, does scythe plan to make a dualcore vga cooler? I mean like accelero xtreme 4870x2? Thank you! BR, bezgo