Kaze Master problem

Retro-R · #1 (**permalink**) 09-01-2008, 08:16 PM

I have had my Kaze Master for a week and it appears to have a fault, switched it on this morning to find no2 fan not working nothing showing on the rpm display either. I checked the fan by plugging it in to another channel and it worked fine. Also checked all the connections appear ok but the FET for channel 2 was cold all the others were warm ( I guess due to the resistance from slowing the fans down?) I take it this will need to be RMA'ed and it not fixable? By the way I am using Sharkoon Silent Eagle 2000 120mm fans.

Dave

hiroshige · #2 (**permalink**) 09-02-2008, 07:19 AM

Hello Dave,

sounds as if the KM is defective - please give them back for RMA, sorry for this.

Cheers,
Stefan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#1 (permalink) 09-01-2008, 08:16 PM
Retro-R Junior Member Join Date: Sep 2008 Posts: 1	Kaze Master problem I have had my Kaze Master for a week and it appears to have a fault, switched it on this morning to find no2 fan not working nothing showing on the rpm display either. I checked the fan by plugging it in to another channel and it worked fine. Also checked all the connections appear ok but the FET for channel 2 was cold all the others were warm ( I guess due to the resistance from slowing the fans down?) I take it this will need to be RMA'ed and it not fixable? By the way I am using Sharkoon Silent Eagle 2000 120mm fans. Dave

#2 (permalink) 09-02-2008, 07:19 AM
hiroshige Marketing & Support Join Date: May 2008 Location: Hamburg Posts: 521	Hello Dave, sounds as if the KM is defective - please give them back for RMA, sorry for this. Cheers, Stefan __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!