Kaze Master - multiple fans per channel?

ansver · #1 (**permalink**) 06-06-2008, 10:17 AM

I'm building a new system and was looking at the Kaze Master controller. My questions are:

1. I see each channel is rated at a maximum of 1A. Would this controller support a total of 8 Scythe S-Flex F fans (rated at 0.2A), with 3 fans on one channel, 2 on another and 2 on the third and 1 on the last?

2. Will the fans mentioned above work with the RPM-display function on the Kaze Master? I mean, will the Kaze Master show the correct RPM when used with the S-Flex F fans?

3. How does the temperature reading work? Does Scythe sell temperature probes, or can you recommend any that are compatible?

TIA

hiroshige · #2 (**permalink**) 06-06-2008, 11:13 AM

Hello ansver,

thanks for your questions.

1. I think, this should work - but you have to check it by yourself. The 5,25-Version officially supports 4 fans, so what about buying 2 of them?

2. This surely will not work, you will not see the RPM on the display when using adapters.

3. We do not sell temperature-probes separately, but they are included in the Kaze Masters package.

Cheers,
Stefan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

#1 (permalink) 06-06-2008, 10:17 AM
ansver Junior Member Join Date: Jun 2008 Posts: 1	Kaze Master - multiple fans per channel? I'm building a new system and was looking at the Kaze Master controller. My questions are: 1. I see each channel is rated at a maximum of 1A. Would this controller support a total of 8 Scythe S-Flex F fans (rated at 0.2A), with 3 fans on one channel, 2 on another and 2 on the third and 1 on the last? 2. Will the fans mentioned above work with the RPM-display function on the Kaze Master? I mean, will the Kaze Master show the correct RPM when used with the S-Flex F fans? 3. How does the temperature reading work? Does Scythe sell temperature probes, or can you recommend any that are compatible? TIA

#2 (permalink) 06-06-2008, 11:13 AM
hiroshige Marketing & Support Join Date: May 2008 Location: Hamburg Posts: 521	Hello ansver, thanks for your questions. 1. I think, this should work - but you have to check it by yourself. The 5,25-Version officially supports 4 fans, so what about buying 2 of them? 2. This surely will not work, you will not see the RPM on the display when using adapters. 3. We do not sell temperature-probes separately, but they are included in the Kaze Masters package. Cheers, Stefan __________________ Scythe EU GmbH Support Hamburg Register and enjoy the official Scythe Forum Compatibility List for Scythe CPU Coolers We do not accept unpaid packages! Wir akzeptieren keine unfreien Zusendungen!